Table of Contents
Advertisement
1-3. IInformation of BKPF-106A
S202-4 : 3/4 OPE (3/4 CH operation) switch
The same signal as in 1/2 CH can be output to AES/
EBU OUT connectors 2 if no signal corresponding to
3/4 CH exists in SDI signal.
Audio
S202-4
Group
OFF
Group 1
Outputs 3/4 CH.
Group 2
Outputs 7/8 CH.
Group 3
Outputs 11/12 CH.
Group 4
Outputs 15/16 CH.
Example:
When switch S202-4 is set to ON in audio group 1
1 CH data in
SDI signal
2 CH data in
SDI signal
3 CH data in
SDI signal
4 CH data in
SDI signal
4
4 D211 : SDI IN indicator
4
4
4
This indicator lights in green when a serial digital
video signal corresponding to the setting of S202-1
(D1/D2 system select switch) is input to the SDI IN
connector. It lights in red when no serial digital video
signal is input or when a signal not corresponding to
the system is input.
5
5
5
5
5 D212 : EDH (Error Detection and Handling)
indicator
This indicator lights in green when the EDH data in
the serial digital video input signal to the SDI IN
connector is normal during detection. It lights in red
when an error is detected by the EDH data. It goes off
when a serial digital video signal containing no EDH
data is input.
6
6
6 D213 : SDI OUT indicator
6
6
This indicator indicates the existence of the output
signal from the SDI OUT connector. This indicator
lights in green when an output signal exits. It lights in
red when no output signal exists. It also lights in red
during free-running adjustment (when switch S201 is
set to ON) .
1-10(E)
ON
Outputs 1/2 CH.
Outputs 5/6 CH.
Outputs 9/10 CH.
Outputs 13/14 CH.
AES/EBU OUT 1
S202-4
ON
3/4 OPE
AES/EBU OUT 2
OFF
7
7
7 S101 : Free-running adjustment switch of
7
7
serial decoder
This switch is used during free-running adjustment of
a serial decoder.
OFF : Set during normal operation.
ON : Set during free-running adjustment of a serial
decoder.
Factory setting : OFF
8
8
8 S201 : Free-running adjustment switch of
8
8
serial encoder
This switch is used during free-running adjustment of
a serial encoder.
OFF : Set during normal operation.
ON : Set during free-running adjustment of a serial
encoder.
Factory setting : OFF
BKPF-105A/205/205R
BKPF-106A/206/206R
Advertisement
Table of Contents
