Table of Contents
Advertisement
3-1. Cleaning
Clean the filter at the inside of the front panel periodically
because it apt to catch dust.
It is recommended to replace the filter every five years.
• Filter (3U) : 2-139-072-03
c
If the BDX-E1000 is kept on operating with too dusty of
the filter, the temperature inside the unit getting rise. This
may cause a fire.
1. Turn the power off.
2. Loosen the locking screw on the front panel using a
flat-blade screwdriver.
3. Pull the locking screw toward you and open the front
panel.
Front panel
4. Peel the filter away from the tape.
5. Clean the dust on the filter using a vacuum cleaner.
n
If the filter is too much dusty, it is recommended to
wash it.
When washing the filter, be sure to dry it well.
BDX-E1000
Section 3
Service Overview
Locking screw
6. Fasten the filter to the tape.
Front panel
Tape
Tape
Filter
3-1 (E)
Advertisement
Table of Contents
