Splman; Body; Acc; Serial - Canon imageCLASS MF4890dw Service Manual
Hide thumbs
Also See for imageCLASS MF4890dw:
- Settings manual (120 pages) ,
- Basic operation manual (116 pages) ,
- Starter manual (60 pages)
Table of Contents
Advertisement
■ SPLMAN
COPIER>FUNCTION>SPLMAN
Sub item
Description
TOP-MPT
Adjustment of leading edge margin when feeding from
MP tray.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 104)
TOP-DUP-MPT Adjustment of leading edge margin on both sides/ back
side when feeding from MP tray.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 104)
LEFT-MPT
Adjustment of left margin when feeding from MP tray.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 97)
LEFT-DUP-MPT Adjustment of left margin on both sides/ back side when
feeding from MP tray.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 96)
TOP-CST
Adjustment of leading edge margin when feeding from
cassette.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 104)
TOP-DUP-CST Adjustment of leading edge margin on both sides/ back
side when feeding from cassette.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 104)
LEFT-CST
Adjustment of left margin when feeding from cassette.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 97)
LEFT-DUP-CST Adjustment of left margin on both sides/ back side when
feeding from cassette.
Adjustment in: 0.1mm
Setting range: 50 ~ 150 (Default value: 96)
8
Service Mode > COPIER > OPTION > SERIAL
Common
Double sided
to all
printing
models
model only
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
T-8-11
8
Service Mode > COPIER > OPTION > SERIAL
OPTION
■ BODY
COPIER>OPTION>BODY
Sub item
LOCALE
To set country group.
1: Japan
2: North America
3: Korea
4: China
5: Taiwan
6: Europe
7: Asia
8: Oceania
Execute the following service mode to enable this setting.
■ ACC
COPIER>OPTION>ACC
Sub item
WLAN
-
WLANMODE
Shows whether the Wireless LAN IEEE 802.11/n standard is enabled/disabled.
0: Disabled (When COPIER > OPTION > BODY > LOCALE is set to "6", this is the
default setting.)
1: Enabled (When COPIER > OPTION > BODY > LOCALE is set to the value
other than "6", this is the default setting.)
WLANSERIAL
Use this setting to use the serial interface exclusively for the WiFi function. Use
this setting to take various measurement of Wireless LAN.
0: Normal mode
1: Measurement mode
■ SERIAL
COPIER>OPTION>SERIAL
Sub item
SN-MAIN
Enter the device serial number written on the rating name plate of the host
machine.
8-6
Description
T-8-12
Description
T-8-13
Description
T-8-14
8-6
Advertisement
Table of Contents
Troubleshooting
