Table of Contents
Advertisement
Managed: "from the LAN interface and remotely from the WAN interface" to
enable secure remote management.
When remote management is enabled, a Management SA is automatically
generated. The Management SA uses Manual Keying to set up a VPN tunnel between
the SonicWALL and the VPN client. The Management SA also defines Inbound and
Outbound Security Parameter Indices (SPIs) which match the last eight digits of
the SonicWALL serial number. The preset SPIs are displayed in the Security
Association Information section. It is not necessary to configure a VPN connection
for Remote Managment as the Management SA is automatically configured in this
section.
1. Enter a 16 character hexadecimal encryption key in the Encryption Key
field. Valid hexadecimal characters include 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A,
B, C, D, E and F. A valid encryption key may be 1234567890ABCDEF. Or
you may use the randomly generated key that appears in the Encryp-
tion Key field.
2. Enter a 32 character hexadecimal authentication key in the Authentication Key
field. A valid authentication key may be 1234567890ABCDEF1234567890ABCDEF.
Or you may use the randomly generated key that appears in the Authentication
Key field.
3. Click Update. Restart the SonicWALL for the change to take effect.
SonicWALL Internet Security Appliance Guide Page 95
Advertisement
Table of Contents
