Table of Contents
Advertisement
Setting Up Your CBX-K2
For tone generators without a built-in MIDI interface
CBX-K2
MIDI OUT
MIDI IN
Tone generator
Connect the MIDI OUT terminal on the CBX-K2 to the MIDI
IN terminal on the computer's MIDI interface. The tone
generator should be connected to a MIDI OUT on the
interface.
NOTE
Set the MIDI Thru (or Echo Back) setting on
the sequencer software to ON.
As for the required MIDI settings for the computer and
sequencer software, refer to the respective manuals.
14
MIDI IN
MIDI OUT
MIDI
Interface
Serial port
Computer
With Sequencer
The CBX-K2 can be used with a stand-alone sequencer, for
recording and editing performance data.
CBX-K2
MIDI OUT
Sequencer
Connect the MIDI OUT terminal on the CBX-K2 to the MIDI
IN terminal on the sequencer.
With Tone Generator
In the simple system below, the CBX-K2 is used to play the
voices of the MU100R Tone Generator. This setup could
also serve as a simple, yet powerful live performance rig,
with the CBX-K2 being used as a portable keyboard
controller.
MIDI OUT
CBX-K2
Connect the MIDI OUT terminal on the CBX-K2 to the MIDI
IN terminal on the MU100R.
MIDI IN
MIDI IN
Tone generator
MU100R
Hide quick links:
Advertisement
Table of Contents
