Midi/Ctrl - Vel&Pb (Velocity And Pitchbend) - Yamaha A3000 Owner's Manual
Yamaha professional sampler owner's manual a3000
Hide thumbs
Also See for A3000:
- Owner's manual (41 pages) ,
- Upgrade manual (50 pages) ,
- Quick manual (37 pages)
Table of Contents
Advertisement
MIDI/CTRL - Vel&PB (Velocity and Pitchbend)
Sets the sample's handling of velocity and pitchbend input.
PLAY
PROGRAM
SAMPLE
EASY EDIT
EDIT
TRIM / LOOP
MAP / OUT
FILTER
REC
RECORD
SETUP
METER
DISK
PROGRAM
SAMPLE
SEQUENCE
UTILITY
TOTAL EQ
PANEL PLAY
SEQUENCE
Turn action
Push action
You use this page to set the sample's minimum velocity, velocity offset, and pitchbend
handling.
FYI
Upon receiving a Note-On message, the A3000 first checks that the velocity value is
within the range specified by the EDIT | MAP/OUT VelRnge page ( 173). If the velocity
is outside of this range, the A3000 does not play the note. If the velocity is inside the
range, the A3000 adjusts the velocity according to the minimum and offset values that
you set here, and then applies additional adjustment in accordance with the VelocityCurve
setting on the UTILITY | MIDI Adjust page.
Knob 1
Change Page
• Turn the knob to change to a different page within the MIDI/CTRL function. Avail-
• Push the knob to move to the Program/Sample Selection screen. ( 95)
VelLow
Knob 2
• Turn the knob to select the minimum velocity for note replay. Whenever the A3000
• If you wish to set the value from an external MIDI keyboard: Push the knob so that
EFFECT
SETUP
CONTROL
EG
LFO
MIDI / CTRL
EFFECT
EXT CTRL
MONITOR
VOLUME
DISK
IMPORT
MASTER
SYSTEM
MIDI
Knob 1
Knob 2
able pages are: RCh&Alt, SmpCtl1, SmpCtl2, and Vel&PB (this page).
= 0,...,127
receives a Note-On message with a lower velocity, it will automatically raise the ve-
locity to the value given here.
the knob indicator begins blinking, then play any note using the appropriate velocity
(force). The velocity value will appear on the screen directly above the knob. Lock the
setting in by pressing the knob again or by moving to a different page.
MIDI/CTRL Function
Turn Knob 1 to select Vel&PB.
Knob 3
Knob 4
-
-
Select P/S
MIDI IN
Chapter 5
Knob 5
-
-
EDIT Mode
215
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
