Yamaha 006IPTO-F0 Owner's Manual page 99

Digital production console version 2
Table of Contents

Advertisement

Setting Send Levels from the Display
You can view multiple channels' Aux Send levels on the screen and adjust them individually.
1 Press the AUX SELECT [AUX 1]–[AUX 8] buttons to select the Aux Sends.
2 Press the AUX SELECT [DISPLAY] button repeatedly until the page listed
below that contains the desired channels appears.
- Send1-32 page
This page displays the Aux Send levels of Input Channels 1–32.
- Send33-48 page
This page displays the Aux Send levels of Input Channels 33–48.
The parameters on these two pages (and the procedure for setting them) are the same.
• Aux Send rotary controls
These controls adjust the Aux Send level of the Input Channels. The current numeric levels
appear below the rotary controls.
• PRE/POST
These buttons enable you to specify the Aux Sends signal source points. The PRE buttons
send pre-fader signals, and the POST buttons send post-fader signals.
• MODE
Aux Sends have two operating modes that determine how signals are sent: Fixed (Aux Send
levels are fixed); and Variable (Aux Send levels are variable).
• GLOBAL
The GLOBAL PRE and POST buttons enable you to set all Input Channels for the selected
Aux Send to pre-fader or post-fader simultaneously.
• PRE POINT
The PRE POINT PRE ON and POST ON buttons enable you to set the pre-fader channels
to pre-on (before the [ON] button) or post-on (after the [ON] button).
Note: In Fixed mode, Aux Send ON/OFF buttons appear instead of the Aux Send rotary con-
trols, PRE/POST buttons, GLOBAL PRE/POST buttons, and PRE POINT PRE ON/POST
ON. These ON/OFF buttons turn on or off each Input Channel for the currently-selected Aux
Send.
Setting Aux Send Levels
DM1000 Version 2—Owner's Manual
99
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd83390Dm 1000

Table of Contents