Yamaha STAGEPAS 150M Owner's Manual

Yamaha portable pa system owner's manual

Hide thumbs Also See for STAGEPAS 150M:

Servise manual (61 pages)

Service manual (61 pages)

Owner's manual (4 pages)

page of 2

/ 2
Bookmarks

Quick Links

Download this manual See also: Service Manual

Enlarged version

Owne r 's Ma n ua l

Introduction

Thank you for your purchase of the Yamaha PORTABLE PA SYSTEM STAGEPAS 150M. The STAGEPAS 150M

is a versatile, compact PA system consisting of a speaker and a mixer.

In order to get the most out of your new STAGEPAS 150M and its sophisticated functions, we suggest you

read through this manual thoroughly. Also keep it in a safe place for future reference.

Features

● Two-way, 8-inch (20 cm) speaker system

The built-in speaker delivers high-quality powerful sound from an exceptionally compact cabinet.

The scratch-resistant speaker is rugged enough for outdoor use.

● Powered mixer

The powered mixer is a convenient, high-performance all-in-one unit that includes EQ and reverb. With two

monaural inputs and three stereo inputs, the STAGEPAS 150M can be connected to a wide range of

instruments and devices.

● Convenient storage

The STAGEPAS 150M can be used in even the most cramped quarters, inside or outside, since the mixer is

built into the speaker cabinet.

Package Contents

Speaker (300S), mixer, power cord, speaker cable, Owner's Manual (this booklet)

NOTE:

The mixer is installed in the speaker when the STAGEPAS 150M leaves the factory.

Before turning on the mixer

Remove the mixer

Be sure that the mixer's power switch is turned off.

Use a screwdriver or coin to turn each screw on the mixer from LOCK to

OPEN until it clicks.

LOCK

OPEN

LOCK

OPEN

Securely hold the mixer's handles to remove it from the speaker.

Use only the mixer's handles when removing the mixer from the speaker and when carrying the mixer

separate from the speaker.

Caution

NOTE:

The mixer can also be used when installed in the speaker.

When you install the mixer into the speaker, make sure to match the indentations on the speaker cabinet to

the corresponding parts on the mixer, and then turn each screw from OPEN to LOCK until it clicks.

Turning the power on/off

Be sure that the mixer's power switch is turned off.

Connect the included power cord to the [AC IN] jack, and plug the power

cord into a power outlet.

• To avoid any loud, unexpected noise from the speakers, first turn on the power to those connected

devices that are closest to the sound source.

Caution

Example: Sound source (CD player or instrument) → STAGEPAS 150M

When turning off the power to the system, reverse the order described above.

• Before turning on the power, set the LEVEL controls and MASTER LEVEL control to their minimum setting (zero).

Press the mixer's power switch to the ON position.

The POWER indicator lights.

To turn the power off, press the power switch to the OFF position.

The POWER indicator turns off.

Troubleshooting

Power does not turn on

• Is the included power cord correctly connected to a power outlet?

Power shuts down suddenly

• Is the volume set at high for an extended period of time?

If the mixer is used at a volume beyond the permissible level, the protection circuit automatically turns the

power off. Turn on the power again only after the mixer cools, since it cannot be turned on until the internal

temperature goes down. Reduce the volume with the MASTER LEVEL control so that the LIMITER indicator

flashes only briefly in response to the highest transient peaks.

• Is the vent on the top panel of the mixer blocked?

Since inadequate ventilation can result in overheating the mixer, the protection circuit may come on

automatically and the power may be turned off. Turn on the power again only after the mixer cools, since it

cannot be turned on until the internal temperature goes down.

No sound is heard

• Are external instruments (including a microphone) or speakers correctly connected to the mixer?

• Are the LEVEL controls of all relevant channels and/or the MASTER LEVEL control set to appropriate levels?

• Is the SPEAKER jack connected to the included speaker (300S)?

• Is the POWER indicator flashing? There may be a short in the speaker cable or the connection may be

faulty. Check that the speaker cable is correctly connected to the mixer and reapply the power.

• Is the CLICK switch (for headphones) set to OFF?

• If sound is not still output, contact your Yamaha dealer.

Sound is distorted or noise is produced

• Are the LEVEL controls of all relevant channels and/or the MASTER LEVEL control set to appropriate levels?

• Are the MIC/LINE switches of each channels set appropriately?

• Are both XLR type and phone type jacks on channels 1–2 being used (connected) at the same time?

Please connect to only one of these jacks on each channel.

• Is the input signal from the connected device set to an appropriate level?

Sound is not loud enough

• Are the LEVEL controls of all relevant channels and/or the MASTER LEVEL control set to appropriate levels?

OPEN

• Are the MIC/LINE switches of each channels set appropriately?

• Are both XLR type and phone type jacks on channels 1–2 being used (connected) at the same time?

Please connect to only one of these jacks on each channel.

OPEN

• Is the input signal from the connected device set to an appropriate level?

Reverb is not applied to the sound

• Are the REVERB switches of each channels set to ON (

• Is the REVERB control set to an appropriate level?

Getting a more powerful sound from the speakers

• Is the SPEECH/MUSIC switch set to MUSIC (

• Are the Equalizer controls (HIGH/LOW) set to appropriate levels?

Getting a clearer sound for announcements

• Is the SPEECH/MUSIC switch set to SPEECH (

• Are the Equalizer controls (HIGH/LOW) set to appropriate levels?

Outputting the signal to a main mixer

• Connect a main mixer to the ST SUB OUT jack. The ST SUB OUT jack outputs the signal prior to routing

through the MASTER LEVEL control. Adjust the level of output signal from the ST SUB OUT jack with the ST

SUB OUT control. The ST SUB OUT control does not affect the MASTER LEVEL control. If only the L (left)

ST SUB OUT jack is used, the mixer mixes the left and right signals and sends them to the jack.

Block Diagram

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The above warning is located on the bottom

of the mixer and the rear of the speaker.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Power supply/Power cord

• Only use the voltage specified as correct for the device. The required

voltage is printed on the name plate of the device.

• Use only the included power cord.

• Do not place the power cord near heat sources such as heaters or

radiators, and do not excessively bend or otherwise damage the cord,

place heavy objects on it, or place it in a position where anyone could

walk on, trip over, or roll anything over it.

• Be sure to connect to an appropriate outlet with a protective grounding

connection. Improper grounding can result in electrical shock.

Do not open

• Do not open the device or attempt to disassemble the internal parts or

modify them in any way. The device contains no user-serviceable parts.

If it should appear to be malfunctioning, discontinue use immediately and

have it inspected by qualified Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the device or other property. These precautions include, but are not limited to, the following:

Power supply/Power cord

• Remove the electric plug from the outlet when the device is not to be used

for extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

Location

• Before moving the device, remove all connected cables.

• When setting up the device, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn

off the power switch and disconnect the plug from the outlet. Even when

the power switch is turned off, electricity is still flowing to the product at

the minimum level. When you are not using the product for a long time,

make sure to unplug the power cord from the wall AC outlet.

• Do not use the device in a confined, poorly-ventilated location. Make sure

that there is adequate space between the mixer and surrounding walls or

other devices: at least 30 cm at the sides, 30 cm behind and 30 cm

above. If the mixer is to be used installed into the speaker cabinet, make

sure to allow adequate space between the speaker and the surrounding

walls or other devices: at least 30 cm at the sides, 30 cm behind and 30

cm above. Inadequate ventilation can result in overheating, possibly

causing damage to the device(s), or even fire.

• Do not use the speaker's handles for suspended installation. Doing so

can result in damage or injury.

• Avoid setting all equalizer controls and faders to their maximum.

Depending on the condition of the connected devices, doing so may

cause feedback and may damage the speakers.

• Do not expose the device to excessive dust or vibrations, or extreme cold

or heat (such as in direct sunlight, near a heater, or in a car during the

day) to prevent the possibility of panel disfiguration or damage to the

internal components.

• Do not place the device in an unstable position where it might

accidentally fall over.

• Do not block the vents. This mixer has ventilation holes at the top to

prevent the internal temperature from becoming too high. In particular, do

not place the device on its side or upside down. Inadequate ventilation

can result in overheating, possibly causing damage to the device(s), or

even fire.

• Do not use the device in the vicinity of a TV, radio, stereo equipment,

mobile phone, or other electric devices. Doing so may result in noise,

both in the device itself and in the TV or radio next to it.

Connections

• Before connecting the device to other devices, turn off the power for all

devices. Before turning the power on or off for all devices, set all volume

levels to minimum.

• For the SPEAKER jack, use only the included speaker (300S) and speaker

cable. Use of other types of speakers and cables may result in damage to

the device(s), or even fire.

(5)-5

Explanation of Graphical Symbols

Dimentions

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

■

Speaker

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the product.

10 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused

for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Specifications

(UL60065_03)

■

General Specifications

Maximum Output Power

PRECAUTIONS

150 W (±10 %)/4Ω @ 10 % THD at 1 kHz (SPEAKER)

100 W/4Ω @ 1 % THD at 1 kHz (SPEAKER)

Maximum Output Level

112 dB (1 m)

Frequency Response (Nomimal output level @ 1 kHz)

-3 dB, 0 dB, +1 dB @ 20 Hz-20 kHz (MUSIC/SPEECH=MUSIC) (ST SUB OUT)

-3 dB, 0 dB, +1 dB @ 80 Hz-20 kHz (MUSIC/SPEECH = SPEECH) (ST LINK OUT)

-3 dB, 0 dB, +1 dB @ 20 Hz-20 kHz, 1 W Output (MUSIC/SPEECH=MUSIC, without

Speaker EQ) (SPEAKER)

Total Harmonic Distortion

0.5 % @ 20 Hz, 1 kHz, 20 kHz +14 dBu GAIN= nominal (ST SUB OUT, ST LINK OUT)

Hum & Noise (Equivalent Input Noise, Rs = 150Ω, MIC/LINE = MIC)

Water warning

-112 dBu (CH1/2)

-65 dBu Residual output noise (SPEAKER)

• Do not expose the device to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill

Crosstalk (1 kHz)

into any openings. If any liquid such as water seeps into the device, turn

-70 dB between input channels

off the power immediately and unplug the power cord from the AC outlet.

Then have the device inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

If you notice any abnormality

• If the power cord or plug becomes frayed or damaged, or if there is a

sudden loss of sound during use of the device, or if any unusual smells

or smoke should appear to be caused by it, immediately turn off the

power switch, disconnect the electric plug from the outlet, and have the

device inspected by qualified Yamaha service personnel.

• If this device should be dropped or damaged, immediately turn off the

power switch, disconnect the electric plug from the outlet, and have the

device inspected by qualified Yamaha service personnel.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

WARNING: THIS APPARATUS MUST BE EARTHED

Handling caution

IMPORTANT. The wires in this mains lead are coloured in accordance with the following

code:

• When turning on the AC power in your audio system, always turn on the

device LAST, to avoid speaker damage. When turning the power off, the

device should be turned off FIRST for the same reason.

• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.

• Do not insert your fingers or hands in any gaps or openings on the device

(vents,, ports, etc.).

For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.)

into any gaps or openings on the device (vents, ports, etc.) If this

happens, turn off the power immediately and unplug the power cord from

CANADA

the AC outlet. Then have the device inspected by qualified Yamaha

Yamaha Canada Music Ltd.

135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada

service personnel.

Tel: 416-298-1311

U.S.A.

• Do not use the device or headphones for a long period of time at a high

Yamaha Corporation of America

or uncomfortable volume level, since this can cause permanent hearing

6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A.

loss. If you experience any hearing loss or ringing in the ears, consult a

Tel: 714-522-9011

physician.

• Do not operate the device if the sound is distorting. Prolonged use in this

MEXICO

condition could cause overheating and result in fire.

Yamaha de México S.A. de C.V.

Calz. Javier Rojo Gómez #1149, Col. Guadalupe del Moral

• Do not rest your weight on the device or place heavy objects on it, and

C.P. 09300, México, D.F., México

Tel: 55-5804-0600

avoid use excessive force on the buttons, switches or connectors.

BRAZIL

Yamaha Musical do Brasil Ltda.

Interference From Cell Phones

Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi, CEP 04534-

013 Sao Paulo, SP. BRAZIL

Using a cell phone near the speaker system can induce noise. If this occurs,

Tel: 011-3704-1377

move the cell phone further away from the speaker system.

ARGENTINA

Yamaha Music Latin America, S.A.

Sucursal de Argentina

Air blowing out of the bass reflex ports is normal, and often occurs when the

Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina

Tel: 1-4371-7021

speaker is handling program material with heavy bass content.

PANAMA AND OTHER LATIN

AMERICAN COUNTRIES/

Yamaha cannot be held responsible for damage caused by improper use

CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.

or modifications to the device.

Torre Banco General, Piso 7, Urbanización Marbella,

Calle 47 y Aquilino de la Guardia,

Ciudad de Panamá, Panamá

Always turn the power off when the device is not in use.

Tel: +507-269-5311

The performance of components with moving contacts, such as switches,

volume controls, and connectors, deteriorates over time. Consult qualified

THE UNITED KINGDOM

Yamaha service personnel about replacing defective components.

Yamaha Music U.K. Ltd.

Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England

• The illustrations as shown in this manual are for instructional purposes

Tel: 01908-366700

only, and may be different from the ones on your equipment.

GERMANY

Yamaha Music Central Europe GmbH

• The company names and product names in this manual are the

Siemensstraße 22-34, 25462 Rellingen,Germany

trademarks or registered trademarks of their respective companies.

Tel: 04101-3030

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Central Europe GmbH, Branch Switzerland

IMPORTANT

Seefeldstrasse 94, 8008 Zürich, Switzerland

Please record the serial number of this unit in the space below.

Tel: 01-383 3990

Model:

AUSTRIA

Serial No.:

Yamaha Music Central Europe GmbH, Branch Austria

The serial number is located on the bottom or rear of the unit.

Schleiergasse 20, A-1100 Wien, Austria

Retain this Owner's Manual in a safe place for future reference.

Tel: 01-60203900

CZECH REPUBLIC/SLOVAKIA/

• This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(Ser.No)

HUNGARY/SLOVENIA

Yamaha Music Central Europe GmbH,

Branch Austria, CEE Department

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-602039025

Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/

Yamaha Manual Library:

■

Mixer

160

275

255

120

2-M8x25

Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at

any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

Power Consumption

20 W

Weight

9.6 kg (Speaker + Powered Mixer)

Stereo Input Channel Equalization

±15 dB

HIGH 10 kHz shelving

LOW 100 Hz shelving

■

Speaker (300S)

Enclosure

2 way bass-reflex type, Polypropylene, Black

Crossover Frequency

4.0 kHz (LF: 12 dB/oct, HF: 12 dB/oct)

Frequency Range

55 Hz-20 kHz (-10 dB)

Speaker Unit

LF: 8" (20 cm) Cone

HF: 1" (2.54cm) Compression Driver

FCC INFORMATION (U.S.A.)

IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as

does not guarantee that interference will not occur in all installations. If this product is

indicated in the instructions contained in this manual, meets FCC requirements.

found to be the source of interference, which can be determined by turning the unit

Modifications not expressly approved by Yamaha may void your authority, granted by

"OFF" and "ON", please try to eliminate the problem by using one of the following

the FCC, to use the product.

measures:Relocate either this product or the device that is being affected by the

interference.

IMPORTANT: When connecting this product to accessories and/or another product

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or

use only high quality shielded cables. Cable/s supplied with this product MUST be

install AC line filter/s.

used. Follow all installation instructions. Failure to follow instructions could void your

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna

FCC authorization to use this product in the USA.

lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable.

NOTE: This product has been tested and found to comply with the requirements listed

If these corrective measures do not produce satisfactory results, please contact the

in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these

local retailer authorized to distribute this type of product. If you can not locate the

requirements provides a reasonable level of assurance that your use of this product in

appropriate retailer, please contact Yamaha Corporation of America, Electronic Service

a residential environment will not result in harmful interference with other electronic

Division, 6600 Orangethorpe Ave, Buena Park, CA90620

devices. This equipment generates/uses radio frequencies and, if not installed and

The above statements apply ONLY to those products distributed by Yamaha

used according to the instructions found in the users manual, may cause interference

Corporation of America or its subsidiaries.

harmful to the operation of other electronic devices. Compliance with FCC regulations

IMPORTANT NOTICE FOR THE UNITED KINGDOM

As the colours of the wires in the mains lead of this apparatus may not correspond with the

Connecting the Plug and Cord

coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug

which is marked by the letter E or by the safety earth symbol

or colored GREEN or GREEN-

and-YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter N or coloured BLACK.

GREEN-AND-YELLOW : EARTH

The wire which is coloured BROWN must be connected to the terminal which is marked with the

BLUE

: NEUTRAL

letter L or

coloured RED.

BROWN

: LIVE

NORTH AMERICA

ASIA

POLAND

Yamaha Music Central Europe GmbH

THE PEOPLE'S REPUBLIC OF CHINA

Sp.z. o.o. Oddzial w Polsce

ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland

Yamaha Music & Electronics (China) Co.,Ltd.

Tel: 022-868-07-57

25/F., United Plaza, 1468 Nanjing Road (West),

Jingan, Shanghai, China

THE NETHERLANDS/

Tel: 021-6247-2211

BELGIUM/LUXEMBOURG

INDONESIA

Yamaha Music Central Europe GmbH, Branch Benelux

Clarissenhof 5-b, 4133 AB Vianen, The Netherlands

PT. Yamaha Music Indonesia (Distributor) PT. Nusantik

Tel: 0347-358 040

Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto

Kav. 4, Jakarta 12930, Indonesia

FRANCE

Tel: 21-520-2577

CENTRAL & SOUTH AMERICA

Yamaha Musique France

BP 70-77312 Marne-la-Vallée Cedex 2, France

KOREA

Tel: 01-64-61-4000

Yamaha Music Korea Ltd.

8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu,

ITALY

Seoul, Korea

Yamaha Musica Italia S.P.A. Combo Division

Tel: 080-004-0022

Viale Italia 88, 20020 Lainate (Milano), Italy

MALAYSIA

Tel: 02-935-771

Yamaha Music Malaysia, Sdn., Bhd.

SPAIN/PORTUGAL

Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,

Yamaha Música Ibérica, S.A.

Petaling Jaya, Selangor, Malaysia

Ctra. de la Coruna km. 17, 200, 28230

Tel: 3-78030900

Las Rozas (Madrid), Spain

Tel: 91-639-8888

SINGAPORE

Yamaha Music Asia Pte., Ltd.

SWEDEN

#03-11 A-Z Building 140 Paya Lebor Road, Singapore 409015

Yamaha Scandinavia AB

Tel: 747-4374

J. A. Wettergrens Gata 1, Box 30053

TAIWAN

S-400 43 Göteborg, Sweden

Tel: 031 89 34 00

Yamaha KHS Music Co., Ltd.

3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C.

DENMARK

Tel: 02-2511-8688

YS Copenhagen Liaison Office

THAILAND

Generatorvej 6A . DK-2730 Herlev, Denmark

Tel: 44 92 49 00

Siam Music Yamaha Co., Ltd.

891/1 Siam Motors Building, 15-16 floor Rama 1 road,

NORWAY

Wangmai, Pathumwan Bangkok 10330, Thailand

Norsk filial av Yamaha Scandinavia AB

Tel: 02-215-2626

Grini Næringspark 1

N-1345 Østerås, Norway

OTHER ASIAN COUNTRIES

Tel: 67 16 77 70

Yamaha Corporation, Asia-Pacific Music Marketing Group

EUROPE

Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650

RUSSIA

Tel: +81-53-460-2317

Yamaha Music (Russia)

Office 4015, entrance 2, 21/5 Kuznetskii

Most street, Moscow, 107996, Russia

OCEANIA

Tel: 495 626 0660

AUSTRALIA

OTHER EUROPEAN COUNTRIES

Yamaha Music Australia Pty. Ltd.

Yamaha Music Central Europe GmbH

Level 1, 99 Queensbridge Street, Southbank,

Siemensstraße 22-34, 25462 Rellingen, Germany

Victoria 3006, Australia

Tel: +49-4101-3030

Tel: 3-9693-5111

COUNTRIES AND TRUST TERRITORIES IN

AFRICA

PACIFIC OCEAN

Yamaha Corporation, Asia-Pacific Music Marketing Group

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2313

MIDDLE EAST

HEAD OFFICE

Yamaha Corporation, Pro Audio & Digital Musical

TURKEY/CYPRUS

Instrument Division

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Yamaha Music Central Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Japan 430-8650

Tel: +81-53-460-2441

Tel: 04101-3030

OTHER COUNTRIES

Yamaha Music Gulf FZE

LOB 16-513, P.O.Box 17328, Jubel Ali, Dubai, United Arab

Emirates

Tel: +971-4-881-5868

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

http://www.yamaha.co.jp/manual/

712MW-01A0 Printed in China

Unit: mm

96.3

(class B)

(3 wires)

PA19

Summary of Contents for Yamaha STAGEPAS 150M

Page 1 2-M8x25 Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at Specifications any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.
Page 2 LINE Turning the power on First, turn on the power to any connected devices, then turn the STAGEPAS 150M power on. If you’ve connected powered speakers to the mixer, turn on the power of the mixer first, then the powered speakers.

Yamaha STAGEPAS 150M Owner's Manual

Quick Links

Related Manuals for Yamaha STAGEPAS 150M

Summary of Contents for Yamaha STAGEPAS 150M