D-Link DSL-2750E How To Set Up

Hide thumbs Also See for DSL-2750E:

Download this manual

Step 1: Connect device

1.1 Connect telephone line from wall outlet to DSL-2750E directly or

1.2 If you wish to use internet and your telephone at the same time, please use the splitter that

comes with the packaging box.

The splitter has three ports:

LINE: Connect to a wall phone jack (RJ-11 jack)

Modem: Connect to the Line interface of the router

PHONE: Connect to a telephone set

1.3 Use LAN Cable (CAT5E: RJ45) to connect your computer to any LAN port of DSL-2750E.

Step 2: Login to Router

2.1 Open Web Browser (Internet Explorer, Firefox, Google Chrome) and enter

http://192.168.1.1 on the Address Bar.

2.2 On the login page, please enter username and password and click 'Login'.

Default Username and Password:

Username: admin

Password: admin

Page 1 Modem: Connect to the Line interface of the router PHONE: Connect to a telephone set 1.3 Use LAN Cable (CAT5E: RJ45) to connect your computer to any LAN port of DSL-2750E. Step 2: Login to Router 2.1 Open Web Browser (Internet Explorer, Firefox, Google Chrome) and enter http://192.168.1.1 on the Address Bar.
Page 2 Step 3: On the device Setup page, please click on ‘Setup Wizard’ to run the step-by-step configuration wizard. 3.1 Click ‘Next’ to continue. 3.2 The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section, you can enable or disable Daylight Saving and set the time zone that you are in and set the NTP (Network Time Protocol) Server.
Page 3 Enter password twice (Password and Confirm Password) Click Next. 3.4 Wireless (WIFI) Setup: 3.4.1 Check the ‘Enable Your Wireless Network’ box. 3.4.2 Enter your preferred wireless network name (SSID). 3.4.3 Enter your wireless encryption key. If you do not want to setup Wireless Security, please Select ‘None’.
Page 4 Step 4: Change administrator password: Default Username and Password: Username: admin Password: admin 4.1 If you do not wish to change the administrator password, please click ‘Skip’ 4.2 Please follow steps below if you wish to change password, Current Password: Insert current Password (Default Password is admin) New Password: Insert new Password Confirm Password: Insert new Password again...