en-US | 4 4 | User Guide | TPA 300
In the meantime, the
TPA 300 screen will
change to the TPMS
sensors triggering
screen with the
matching vehicle
selected.
At this stage, you have to read all the TPMS sensor IDs using the TPA 300 tool,
exactly the same way you do in Standalone mode. If you are not already familiar with
this procedure, see the dedicated section in this user manual.
Warning: For best sensor triggering, hold the tool
against the tire sidewall right above the sensor.
Read all sensors in
the normalized order.
LF (Left Front)
RF (Right Front)
Trigger Sensors
RR (Right Rear)
LR (Left Rear)
© Bosch Automotive Service Solutions Inc.
1699502721 | REV. A | MAY 2020