Siemens SINUMERIK 840D Operation/Programming Manual page 153
Shopmill
Hide thumbs
Also See for SINUMERIK 840D:
- Function manual (920 pages) ,
- Diagnostics manual (714 pages) ,
- Operating turning (713 pages)
Table of Contents
Advertisement
2
10.04
Oversize (U)
Coded for fixed location (P)
Monitoring tool use
Entering tool statuses
Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
In the case of oversize tools, neighboring magazine locations (left and
right adjacent location) are only reserved alternately, i.e. you can only
insert the next tool in the next magazine location but one. (This can
also contain an oversize tool.)
You can assign tools to a fixed location, i.e., the tool can only be used
in its present magazine location. After machining, the tool always
returns to its old magazine location.
Select the "Tool wear" softkey in the "Tools WOs" operating area.
Position the cursor on the tool that you want to monitor.
In the column "T/C" select the parameter that you wish to monitor
(T = Tool life, C = Count, W = Wear).
Enter a prewarning limit for the tool life, count, or wear.
Enter the scheduled service life for the tool, the scheduled
number of workpieces to be machined or the maximum
permissible wear.
The tool is disabled when the tool life, count, or wear is reached.
Select the "Tool wear" softkey in the "Tools WOs" operating area.
Place the cursor on a tool.
Select the option "G" in the first field of the last column if you want
to disable the tool for machining.
-or-
Select the option "U" in the second field of the last column if you
want to mark the tool as oversize.
-or-
Select the option "P" in the third field of the last column if you
want assign the tool to a fixed magazine location.
The tool properties you have set become active immediately.
2.13 Tools and tool offsets
2
Operation
2-153
- Quick Links:
- Shopmill
Hide quick links:
Advertisement
Table of Contents
