Labels On The Incubators; Environmental Conditions - Sanyo MCO-19AIC(UV) Instruction Manual

Co2 incubator
Hide thumbs Also See for MCO-19AIC(UV):
Table of Contents

Advertisement

LABELS ON THE INCUBATOR
Warning and caution labels are attached to the Incubator. The following table describes the labels.
EMVIRONMENTAL CONDITIONS
The Indicator is designed to be safe if used under the following conditions (based on the IEC 61010-1):
Indoors
Altitudes up to 2000 m
Ambient temperature from 5 to 40
Maximum humidity of 80% for temperatures up to 31
o
50% at 40
C
Main power supply voltage fluctuations of 10% of the nominal voltage
Other power supply voltage fluctuations as stated by the manufacturer
Transient overvoltages according to Installation Category II
For the main power supply, the minimum and normal category is II.
Pollution degree 2 according to IEC 60664.
7
This label is attached to covers that access high-voltage electrical components to
prevent electric shock. Only a qualified engineer or service personnel should be
allowed to open these covers.
This symbol indicates an ultraviolet light (UV) caution.
This symbol indicates that caution is required. Refer to product documentation for
details.
This symbol indicates a hot surface.
This symbol indicates an earth.
This symbol means "ON" for a power switch.
This symbol means "OFF" for a power switch.
o
C
o
C decreasing linearly to maximum humidity of
98

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mco-19aic

Table of Contents