Table of Contents
Advertisement
Introduction
Building Technologies
HVAC Products
6.2
Basic settings via ACS
The basic settings (see section 6.1.1 ff) can also be modified with the ACS Service
software.
After selection of the relevant device, the menu tree has the same structure as the
path sequence in the operator units, e.g. for the RMU730 controller:
Commissioning > Communication > Basic settings
1. In ACS Service Applications > Parameter settings , open the menu tree of the device
for which the basic settings (defaults) are to be modified.
2. Double-click the menu line "Basic settings" to open the operating page, and
select the data point for which you want to modify the default value.
3. Double-click the selected data point to open the dialog box for entering the
value.
4. Enter the value and click the
confirm the entry with the
Basic documentation: Communication via the KNX bus
Basic communication settings
Write
button or (depending on the dialog box)
OK
button.
65/120
CE1P3127en
30.08.2007
Hide quick links:
Advertisement
Table of Contents
