Hitachi FDS 10DVA Manual page 3
Hide thumbs
Also See for FDS 10DVA:
- Handling instructions manual (39 pages) ,
- Instruction manual (24 pages) ,
- Handling instructions manual (31 pages)
Advertisement
(2) Connecting the Spindle Gear Set
Electrical Components Assembled as Described
in Para. (1):
When connecting the Spindle Gear Set
electrical components assembled as described in
Para. (1) above,ensure that the colored lead
wires soldered to the Motor
positioned with relation to the notched portion of
the Spindle Gear Set
sections with the four D3 x 8 Tapping Screws
(See Fig. 3)
(3) Reassembly of the Clutch Section:
Assemble the Cap
During assembly,be very careful not to allow the four Steel Balls
(a) When assembling the Spindle Holder
portions of the Spindle Gear Set
Spring Holder
9
Protruding Portion
13
and the
21
are correctly
13
before fastening the two
9
and Shift Arm
15
13
are properly aligned with the matching protruding portions of the
12
. (See Fig. 5)
11
10
White Line
Notched Portion
13
and the
Notched Portion
Tapping Screw D3 x 8
16
.
onto the Spindle Gear Set
12
onto the Spindle Gear Set
13
12
14
Fig. 4
Protruding Portions
Fig. 5
−#3 −
Spindle Gear Set
Internal Wire (Yellow)
Motor
16
Fig. 3
13
. (See Fig. 4)
14
to drop out of the Spindle Gear Set
13
, ensure that the notched
Internal Wire
15
(Yellow)
Notched Portion
13
21
13
.
Advertisement
