Data Save and Shutdown
Customer Data Saving (to CF Card)
The Customer Data can be saved to CF Card.
1. Insert the CF Card to "CF Slot" at VM-21.
2. Enter to the Programming Mode.
3. PRG 90-03. (Dial 90, 03, 01)
4. Dial "1" and press HOLD Key.
5. Wait about 1 min. (depends on the system size)
6. Display will be changed to next PRG No. after completing the saving.
7. Exit from Programming Mode.
8. Remove the CF Card.
System Shut Down
The system shall be "OFF" by pressing AC Power switch located at Power Supply.
• DO NOT power off by disconnecting the AC power.
• In case of 4 Cabinets, Power ON/OFF should be done from 2nd & 3
Cabinet.
Page 27
© NEC Corporation 2009
บริ ษ ั ท โปรเฟสชั � น แนล พี เ อบี เ อ็ ก ซ์ จํ า กั ด โทร. 02-519-1718 Hotline. 084-920-5065
NEC Confidential
& 4
rd