Siemens DMS8000 MP4.30 Connectivity Manual page 33
Simatrix, telscan, sistore burle/philips ltc8000 light-integration device (external viewer)
Hide thumbs
Also See for DMS8000 MP4.30:
- Application & planning (96 pages) ,
- Applications and planning manual (76 pages) ,
- Manual (46 pages)
Table of Contents
Advertisement
Configuring CCTV network
Building Technologies
Fire Safety & Security Products
Fig 25
Auto-disconnect option in the SISTORE MX RemoteView configuration
Be sure that the IP address and Ports are set in Composer as in the SISTORE
MX program (Network tab)
Be sure that the Usernames and Passwords are set in Composer as in the SIS-
TORE MX program (User Management tab).
Be sure that the pre- and post-trigger are correctly set in the SISTORE MX pro-
gram (Ring Recording tab). Note that
– The time settings should be greater or equal the ones used in the MM8000
Operating Procedures (see MM8000 ICC manual).
– The Software Trigger flag should be checked for each camera involved in
automatic event recording.
In case of recorded video with a pre-trigger, note that the player does not di-
rectly show the pre-trigger time. For example, supposing you have recorded a
video at time "t0" with pre-trigger set at "t0-pt", the player initially starts at "t0"
ignoring the preceding part. In order to show the images from the very begin-
ning, you need to click the left (back) green arrow and reach "t0", then manually
enter a new starting time (earlier enough to get the previous images, up to "t0-
pt") in the search field. This procedure (see Fig 26) unlocks the pre-trigger se-
quence to be shown and searched.
Fig 26
How to view pre-trigger images in the MX player
1
Double click on the recorded video
2
Click the 'Back' button to reach the starting point (not including pre-trigger)
3
Enter the new time, as earlier as necessary
4
Click the 'Search' button
5
Click 'Play' to show the images from the earlier starting point.
PTZ commands are only available via separate control fields (no in-window con-
trol).
If you log-in locally on the SISTORE MX, the PTZ commands in MM8000 do not
work any more.
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
31
06.2010
Advertisement
Table of Contents
