3.2.1
Video Drivers
3.3
CCTV components
6
Building Technologies
Fire Safety & Security Products
Fig 2
New tab added by the VNM in the MM8000 project
The VNM can support the drivers required to handle the network communication
with:
Geutebrück MultiScope (OPC driver)
Depending on the specific configuration required, add one or both drivers to your
project. Proceed as follows:
1. Select .the VNM node.
2. In the toolbar, click the icon corresponding to the driver you need (Fig 3):
C – Geutebrück MultiScope (OPC driver)
Fig 3
Video drivers
A
Select this icon to add the SISTORE driver
B
Select this icon to add the TELSCAN driver
C
Select this icon to add the OPC client driver (Geutebrück MultiScope)
If the VNM is present, the Video menu of the Composer button bar on the left hand
side includes an additional icon, corresponding to the following CCTV component:
Geutebrück MultiScope Digital Video Recorder (DVR)
The following Fig 4 illustrates the menu options and the corresponding CCTV com-
ponents.
048_DMS_MM8000_GEUTEBRUECK_Add-On_MP4.20_A6V10067796_a_en
Configuring CCTV network
06.2009