Table of Contents
Advertisement
BEFORE EVERY MASSAGE (CHECK THE UNIT)
Backrest
Seat
Check for
damage
1
1
Lower Back
Cover
Leg/Foot Massage
Section
Check for
dirt and
damage
2
2
3
3
1
Check the surrounding area.
Make sure there are no objects, people, or pets in the
vicinity of the unit.
2
Flip up the pillow.
3
Make sure there is no foreign matter
between the unit.
•
Sit on the unit after confirming there is no foreign matter
between the parts of the unit.
(Check that there is no foreign matter stuck in the
backrest, seat, leg/foot massage section or the rear of the
pillow and the lower back cover.)
4
Check the power cord and the power plug.
•
Regularly wipe any dust off the power plug.
Failure to observe this may lead to insulation failure due to
humidity, etc. and cause fire. (Wipe off dust with a dry cloth.)
•
Do not damage the power cord or the power plug.
(Do not damage it, modify it, place it near a thermal device,
bend it by force, twist it, pull it, place a heavy object on it or
bundle it.)
If they are used in a damaged condition, it may cause electric
shock, short circuit or fire. If the power cord or power plug needs to
be repaired, contact your dealer or the Customer Service Center.
5
Switch on the power supply.
•
Be sure to push the power plug all the way in.
Failure to observe this may cause electric shock or fire due to overheating.
•
Do not exceed the ratings of electrical outlets and wiring devices.
•
Use AC 220V.
(The unit cannot be used overseas or with a transformer.)
Failure to observe this may cause electric shock, malfunction or
fire due to overheating.
•
Do not insert or pull out the power plug with wet hands.
Doing so may cause electric shock.
1 Insert the power plug into an electrical outlet.
2 Turn the lock switch key to the "open" position.
3 Slide the power switch to the "on" position.
* When the electrical plug is plugged in and the power is
switched "On," the controller display might momentarily light up.
E12
Advertisement
Chapters
Table of Contents
