Operating Instructions; Recording Videos - Philips GoSure ADR830 User Manual

Table of Contents

Operating Instructions

5.1.1 Normal Video Recording

When the engine of the

vehicle is on, the device

automatically turns on and

starts recording continuously.

When the engine of the

vehicle is off (parked status),

video recording will stop

automatically. However, if

any moving object at a

reasonable range in front of the device is detected, the

WaveGuard indicator will flash and then video recording

function will be activated immediately. If no further

movement occurs within 10 seconds, the video recording

function will be deactivated again. All these video files will

be saved in the Normal video folder.

5.1.2 Emergency Video Recording

1. When the Collision Detection function is activated, the

device will automatically detect any collisions, create

an emergency video file, and save it in the Emergency

video folder. If this occurs while driving, the emergency

video clip will show video before and after the event. If

this occurs while parked, the emergency video clip can

only show video after the event.

2. During video recording status, you can manually

create an Emergency Recording using the Emergency

buttons to ensure a video file of a specific moment

will be recorded

3. To ensure the necessary disk space for parking

monitoring, the number of emergency files is

restricted to 12. If that limit is exceeded, older ones

will be deleted automatically. In this case, please

backup before the vehicle engine is started.

Table of Contents

Table of Contents