Installing The Internal Antenna - Dell Precision 3240 Compact Service Manual
Hide thumbs
Also See for Precision 3240 Compact:
- Service manual (80 pages) ,
- Manual (79 pages) ,
- Setup and specifications (37 pages)
Table of Contents
Advertisement
Steps
1. Pry the metallic routing tabs and unroute the antenna cables from the chassis.
2. Loosen and remove the single screw (M3x3) securing the internal antenna to the chassis.
Installing the Internal antenna
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the Internal antenna and provides a visual representation of the installation
procedure.
Steps
1. Align and replace the SMA antenna connector on the rear of the chassis and secure it using the single M3x3 screw to the
chassis.
2. Route the antenna cable along the metallic guide path on the chassis.
Next steps
1. Install the
system
board.
2. Install the
interposer
card.
3. Install the
heat
sink.
4. Install the
riser
card.
5. Install the
memory
modules.
Disassembly and reassembly
73
Hide quick links:
Advertisement
Table of Contents
