Table of Contents
Advertisement
d
CAUTION: Do not spill oil while adding oil. Wipe off
any spilled oil. Spilled oil may cause fires.
12. Fill the engine with recommended oil through the oil
filler. Check that oil level is between the minimum and
maximum on oil level gauge (1) after 15 minutes.
f
NOTE: Refer to the recommended oil and grease chart on
page 7-19 for the brand names of oils.
13. Install oil filler cap (2).
14. Start the engine. Run the engine at slow idle for 5
minutes.
15. Stop the engine. Remove the key from the key switch.
16. Check for any leakage from the sealing surface.
17. After 15 minutes, check oil level on the dipstick and add
or drain oil to maintain proper oil level. (The oil level
should be between the upper and lower marks on oil
level gauge (1)).
(Refer to 7-27)
MAINTENANCE
7-30
1
ZX17U-5A
1
2
ZX26U-5A
2
M1MS-07-009
MABA-07-017
Advertisement
Table of Contents
