Page 2
(90) days after any repaired or replaced Hardware is delivered. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware.
Page 3
D-Link not to be defective or non-conforming. What Is Not Covered? This limited warranty provided by D-Link does not cover: Products that have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed;...
DI-2630 Router Table of Content 1. Information of DI-2621 Router............................1 1.1 Information of standard configuration........................1 1.2 Router System Performance and Parameter......................2 1.3 Network/ Voice interface card ..........................2 1.4 Product Specifications............................3 1.5 Care cases for Router usage ..........................6 2.
. 1.1 Information of standard configuration The standard configured ports of DI-2621 Modulor Router are consist of four parts : 2 Fast Ethernet ports, 1 Console port, 1AUX port ,and 1double serial port.The detailed information is as the following table:...
U interface card,1-MODEM card. Support 2-E&M/FXS/FXO voice card, 8-serial port SLOT2 Extended interface card slot2 card. 1.2 Router System Performance and Parameter The DI-2621 Modulor Router system performance and parameter table: main frequency 266M EPROM:512K Bytes; memorize Flash Memory:8~32M Bytes; SDRAM:64MBytes;...
DI-2621 Router Interface card list supported by interface card slot ( note: Please configure as the following table, Do not insert interface card into the wrong slot) : Interface card type Slot1 interface Slot2 extended card interface card name mark...
Page 8
DI-2621 Router RJ-45 with RS-232 interface - Asynchronous serial fast serial port Two port RJ-45 with RS-232 serial interface card slots Two Interface slots Supports WAN interface cards (WIC’s) and Voice interface cards (VIC’s) WAN Interface Cards One port E1 DB-15 One E1/ISDN PRI (30B+D) Supports G.703 / G.704...
As the other similar products , the core will be damaged by openning/ closing fast and frequently . Please close the power 3—5 seconds then to start when restarting DI-2621 modulor Router ; Do not hit badly or fall DI-2621 modulor Router , otherwise these operation will damage internal hardware of the Router ;...
DI-2621 Router 2. Preparing for installation The following diccusses the considering cases of router istallation,includes two sections: Please continre to read "Router Installation" after reading this section. 2.1 Safety notice 2.1.1 Ensure safety as the following principals Keep the chassis ares clear and dust-free during and after installation;...
DI-2621 Router Never assume that power is disconnected from a circiut.Always check. If an accident occurs ,proceed as folllows: Turn OFF power to the system Use caution Determine if the victim needs rescue breathing or external cardiac compressions; then take appropriate action.
Page 13
DI-2621 Router 2.2.4 Power supply condition Check the power at you site to ensure that you are reaieving "claen" power.Install a power conditioner if neccesary.nsure that a fuse or circiut breaker no larger than 240V,10A interminal is used on the phase conductors.
DI-2621 Router 3. Router Installation This section guides the user to complete the installation of DI-2621 modulor Router , including the following sections: Warning: Only trained and qualified personnels should be allowed to install or replace the equipment. 3.1 Installing tools and equipment The tools and equipment needed possible for installation are not provided as the standard equipment with the router , so pleade prepare them by yourself.
DI-2621 Router 3.3 Connecting to console port The DI-2621 modulor Router has 1 console port and 1 remote AUX port. This section introduces the two ports and the usage . 1. Console port Console port speed is 1200bps—115200bps, standard RJ45 no indicator lamp, parity ckeck is optional and has flaw control.It connects to the terminal by special console cable ( such as : terminal STAR-510G),or to PC serial...
The cable is used to connect DI-2621 modulor Router Console port and external console terminal equipment , with one port of RJ45 8—pin, and another port of DB25and DB9. RJ45 pin insert into a DI-2621 modulor Router Console port socket,the DB25 and DB9 port can choose to use according to the terminal serial port .The inter connecting is as the following .
Page 17
Color arrangement of twist-pair in the picture is depend on EIA/TIA 568A specification: When two DI-2621 modular Router connected interactively, UTP (twist-pair) crossover cable can be used. TP (twist-pair) crossover cable also can be used to connect one Router to CPU LAN card twist-pair port directly. Thus, one HUB can be lieved out on LAN.
DI-2621 Router The color arrangement of cross-over twist-pair cable in the piture is depend on EIA/TIA 568A specification: 3.5 Connecting to Serial port High speed serial port supports V.24/V.28(EIA/TIA-232), V.35 physical layer protocol, providing DB60interface. Users may select corresponding interface cable to connect a specific device.
Page 20
DI-2621 Router positive phase ECLK0A- First group internal timer outputs DTE → DCE,V35 negative phase ECLK0B+ First group internal timer outputs DTE → DCE,V35 positive phase ECLK0B- irst group internal timer outputs DTE → DCE,V35 negative phase TXC0+ First group sends positive phase of DTE ←...
Page 21
DI-2621 Router Signal grounded public signal grounded TXC1+ Second group transmits positive DTE ← DCE,V35 phase of clock TXC1- Second group transmits negative DTE ← DCE,V35 phase of clock RXC1+ Second group receives positive phase DTE ← DCE,V35 of clock...
Page 22
DI-2621 Router Synchronous/asynchronous serial port may connect to DTE or DCE devices with different interfaces by using different cables. - 18 -...
LINK portconnecting indicator port(TPport)connects succesfully by twist-pair and HUB . Each DI-2621 Router need to configure different interface card with indicator lamps itself.The name and information of this lamps refer "Hardware Installing Book of Interface Card". - 19 -...
DI-2621 Router 5. Router Maintain and Protection The main content of this section is how to maintain and protect the DI-2621 modulor Router , including the following sections: Warning: Ensure static electricity emission of your body before openning the chassis.Please read "Safety Guide" before any operating in appendixB after closing the switch of Router.
DI-2621 Router Notes: Put down the top steady avoiding any demage after lifting it , otherwise it will be very difficult to install later. 5.2 Close the chassis This section introduce the procession of locating the top and closing chassis .Please act as the following...
DI-2621 Router 5.3 System memorizer upgrade 5.3.1 SDRAM installing method If you need disassemle or assemble caused because of upgrading or changing in DI-2621 modulor Routers , please act as the following steps : Power OFF the router; Opening the chassis top following the procedure in the "Openning the chassis "show the main panel of Router system .
Page 27
DI-2621 Router B. Lightly push it up, enable the two orientation steel strips (1, 2) firmly stick to the circuit board C. When you are dismantling it, you should first break the orientation steel strips on two points of 1, 2 off with fingers and thumbs, meanwhile pushing downwards the FALSH extend stripe, until the circuit board completely departs from the fastness of the orientation steel strips.
78330 Fontenay le Fleury Australia France TEL: 61-2-8899-1800 TEL: 33-1-30238688 FAX: 61-2-8899-1868 FAX: 33-1-30238689 URL: www.dlink.com.au URL: www.dlink-france.fr India Netherlands D-Link House, Kurla Bandra Weena 290 Complex Road, 3012 NJ Rotterdam Off CST Road, Santacruz (East), Mumbai - 400098. Netherlands India...
Page 29
Einstein Park II Block B 102-106 Witch-Hazel Avenue Highveld Technopark Centurion Gauteng Republic of South Africa TEL: 27-12-665-2165 FAX: 27-12-665-2186 URL: www..d-link.co.za Russia Grafsky per., 14, floor 6 Moscow 129626 Russia TEL: 7-095-744-0099 FAX: 7-095-744-0099 #350 URL: www.dlink.ru China Room 507/508, Tower W1, The towers Oriental Plaza NO.1,...