Table of Contents
Advertisement
Figure 30
1. Test button
2. Zap-alert tester
3. Zap-alert system
4. Zap-alert system
grounding stud
4. Connect the other alligator clip to a metal component
of the machine frame.
5. Press the T
button on the Zap-Alert tester
EST
30).
The Zap-Alert alarm should sound, and the strobe on
top of the front hood should flash.
6. Press the Z
-A
AP
LERT
(Figure
30).
7. Disconnect the alligator clips from the grounding stud
and the machine.
8. Store the grounding stake in the holder on the operator
platform as shown in
1
Figure 31
1. Grounding stake
5. Reset button
6. Alligator clips
7. Machine grounding point
(Figure
R
button to stop the alarm
ESET
Figure
31.
If either the audible alarm or the strobe light failed to
trigger when you pressed the
repaired before drilling with the machine.
Mounting a Fire Extinguisher
Mount your fire extinguisher below the operator seat
32).
Note: A fire extinguisher is not provided with the machine.
The recommended fire extinguisher is a dry chemical fire
extinguisher approved for class B and C fires.
1. Mounting location
g021838
40
button, have them
TEST
Figure 32
(Figure
- Quick Links:
- Control Panel
- Drilling the Bore
Hide quick links:
Advertisement
Table of Contents
