Advertisement
Step
3
Installing the Indicator
Light
Parts needed for this step:
1
Decal, 94-8582
1
Light assembly
Procedure
Note: A smaller, red light is included in the kit
for use with the Workman Spray System. This will
be installed to the control box. Refer to Installing
the Controls on a Workman Spray System.
1. Install decal 94-8582 over the light hole in the
dash (Figure 11 for the Multi Pro 1200 and
1250 and Figure 12 for the Multi Pro 5600 and
5700).
Figure 11
1. Decal 94-8582
2. Light
3. Washer
4. Nut
Figure 12
1. Decal 94-8582
2. Light
2. Remove the nut and washer from the bottom
of the light.
3. Install the light in the dash and secure it using
the washer and nut (Figure 11 or Figure 12).
4. Connect the 2 spade connectors on a separate
branch of the wiring harness to the posts on
the light.
Step
4
Installing the Controls on a
Multi Pro 1200 or 1250 Turf
Sprayer
Parts needed for this step:
1
Rocker switch
6
Cable ties
Procedure
Installing the Switches
7
3. Washer
4. Nut
Advertisement
