Page 1
SERVICE MANUAL SZTV-22LED4/3MS663M0T2A 1. Caution………………………………………………………………………… 2. specification…………………………………………………………………… 3. Alignment Procedure………………………………………………………… 4.Block diagram………………………………………………………………… 5.Scheme Diagram …………………………………………………………… 6. Troubleshooting……………………………………………………………… This manual is the latest at the time of printing, and does not include the modification which may be made after the printing, by...
Page 2
SCHNEIDER ELECTRONICS GMBH-GERMANY 1. CAUTION CA UTION: Use of controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure. CA UT ION : T O RE DUCE TH E RIS K OF CA U T ION ELECTR ICA L SHOCK, DO NOT RE MOVE COVER (OR BACK).
Page 3
SCHNEIDER ELECTRONICS GMBH-GERMANY IMPORTANT SAFETY INSTRUCTIONS CAUTION: Read all of these instructions. Sa ve these instructions for later use . Follo w all W arnings and Instructions marked on the audio equipment. 1. Read Instructions-All the safety and operating instructionsshouldbe read before the productis operated. 2.
Page 4
PROTECTION AND LOCATION OF YOUR SET Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall outlet and refer servicing to qualified service personnel.
Page 5
SCHNEIDER ELECTRONICS GMBH-GERMANY OPERATION OF YOUR SET 18. This television set should be operated only from the type of power source indicated on the marking label.If you are not sure of the type of power supply at your home, consult your television dealer or local power company. For television sets designed to operate from battery power, refer to the operating instructions.
Page 6
LCD TV SPECIFICATION RELEASE Version: V1.0 Issued Date: 2019.04.19 Model: 22D1200 FHD MS3663 DVB-T2/T/C Brand: Model No.: FORM VERSION: V1 PICTURE Panel Size (inch) 22" Category LCD TV Aspect Ratio 16:9 Color Temperature Cold/Normal/Warm SIGNAL FORMAT CAPABILITY Backlight Adjustable Component Video Format Scaler Mode Auto/4:3/16:9/Zoom1/Zoom2 DVI Video Format...
Page 7
CV3663 MACHINE DEBUG SOP 一、Introduction: CV3663 simulate machine including 2 HDMI port、 2 USB2.0 port、 2 tuner port、 1 AVOUT port、 1 VGA port、 1 SPDIF port、 2 AV port(including 1 Mini AV port) , terminal is rich, can satisfy most of customers. Attention:...
4-WHITE BALANCE White balance data adjustment (detailed below) 5-SHOP INIT Reset before leaving the factory. After confirming OK, all factory information is cleared, the user cannot enter the factory menu 6-NVM Reset System initialization, back to the initial value, it does not clear white balance and ADC data.( only for research and development,...
Page 9
below the menu before calibration. After selecting the ADC Tune item, press the left and right arrow keys to automatically calibrate the current tone. Test source ADC. “Pass” is displayed when the calibration is successful, uncorrected/calibrated "Fail" is displayed when it is failing. R-GAIN 1024 R channel gain,...
Page 10
and 0-255 is adjustable White Balance function: Color temperature debugging (LCD reference color coordinates: X=280, Y=290) Option CV3663 Function Function (OK) Default value Description Source Depending on the Current debugging state before source entering (HDMI needs debugging, other sources do not need to be debugged) TEMPERATURE...
Page 11
adjustable, must not be changed after automatic commissioning COPY ALL Copy current HDMI channel debug data to all other channels 三、R&D design menu Note: The R&D menu is for R&D and debugging only. Please do not change it at will. 1.
Page 12
description, please do not adjust ) 7-Hotel Menu Hotel menu (for after- sales and R&D use, please do not adjust) 8-Reset ALL System initialization, back to the initial value 2.1、 Shop Setting 设置: Option CV3663 Function Description Function Default value (OK) 1-Picture mode standard...
Page 13
information is not saved On: After the external u disk, the serial port print information is saved in the u disk. 9-Advanced Advanced setup options, debug PQ Setting registers, factory frequency points and DTV import and export data to the u disk 2.2.1.Advanced Setting Option CV3663...
Page 14
2.4.1 Curving Setting Option CV3663 Function Description Function Default value (OK) 1-Mode Channel selection adjustment 2-Brightness Brightness curve adjustment, Curve independent adjustment in five segments 3-Contrast Curve Contrast curve adjustment, independent adjustment in five segments 4-Saturation Saturation curve adjustment, Curve independent adjustment in five segments 5-Hue Curve...
Page 15
CV3663 Software Upgrade SOP AC Power on Upgrade Using AC power upgrade must be putting the CV3663.bin in the root directory of the USB flash disk; insert the USB flash disk and press on the key power of the keyboard plate , then AC power, the LED will flicking until upgrade success.
Mode->User->contrast, press"9735"of RC get into the Factory Mode, than chose USB Update->Main Upgrade, click OK, TV starts to upgrade. Enter service mode MENU->Setting->Picture->Picture Mode->User->contrast , press"9735", you can go to the factory menu where you can choose the menu you want to enter.
Page 17
SPEARK 30PIN DIP 30PIN FFC 51PIN FFC 2*8R*8W 8M FLASH CLASS D RDA3118e 3663 USB2.0 HDMI COAX PCMCIA EarPhone Mini_AV IN F‐RF IEC‐RF Title Title Title CV3663LL-A24 CV3663LL-A24 CV3663LL-A24 Size Size Size Document Number Document Number Document Number BLOCK DIAGRAM BLOCK DIAGRAM BLOCK DIAGRAM Date: Date: Date: Monday, July 23, 2018 Monday, July 23, 2018 Monday, July 23, 2018 Sheet...
Page 24
TUNER-T/T2 T2_3V3 ON BOARD-T/T2 100nF/16V ON BOARD-T/T2 CDT-9NT372-RF01 ON BOARD-T/T2 ON BOARD-T/T2 CAN-T/T2 ON BOARD-T/T2 GND5 T2_3V3 TPL51 3.3V T2_3V3 3.3V 120pF/50V M-SCL TPL52 SCL RF_IN 100pF/50V 100nF/16V RFIN AVDD1 6.8nH 270nH ON BOARD-T/T2 M-SDA TPL53 SDA ON BOARD-T/T2 FB1K/200mA RF_bias ON BOARD-T/T2 RF_JACK...
Page 25
TUNER-S/S2 S2_3V3 S2_3V3 ON BOARD-S/S2 ON BOARD-S/S2 ON BOARD-S/S2 ON BOARD-S/S2 ON BOARD-S/S2 ON BOARD-S/S2 ON BOARD-S/S2 ON BOARD-S/S2 CDT-9NS161-RD41 LNB_POWER CAN-S/S2 TPL58 LNB POWER LNB_POWER 2.2pF/50V 2.7pF/50V TPL59 3.3V RFIP S2_3V3 100nF/16V BBQP BBQP IFAGC_S1 TPL60 AGC RF_JACK_THREAD 100nF/16V BBQN BBQN ON BOARD-S/S2...
Trouble shooting diagram Terms: Terms: IR: Infrared Receiver RC: Remote Control IR logic: IR blink with RC action IR logic: IR blink with RC action LVDS: Low Voltage Differential Signal, output from processor and input for panel O/C: Open Cell, panel with source board BL: Back Light, light source for panel module g , g LB: LED (Light Emitting Diode) Bar, light source for BL module...
Page 30
1.No power No power LED, RC or Key can not turn on TV. Power LED no light/no change. No power LED, RC or Key can not turn on TV. Power LED no light/no change.
Page 31
2.No Display / Black Panel Back light is OK, sound is OK, but no picture.
Page 32
3.No back light Power LED logic OK, sound OK, but no picture(Different from No Display). Power LED logic OK, sound OK, but no picture(Different from No Display).
Page 33
4.No sound One or all signal source without sound. ll i...
Page 34
5.Signal source no function One or several source no function. One or several source no function.
Page 35
6.Abnormal Display OSD NG or picture NG. OSD NG or picture NG.
Page 36
7.No tuning channels DTV or ATV no Channels DTV or ATV no Channels...
Page 37
8.P mode on and burning mode Picture Factory mode on(flash words) changing Burning P mode on mode Press Return Press Menu/ Input/ key on remote Source switch on TV control key pad Appear factory menu on screen Quit burning mode Follow the alignment ...