Table of Contents
Advertisement
Operating the Touch Operation Panel
If the touch operation panel display is off, touch
The touch operation panel display will be off when
The monitor display changes to the PM2.5 indicator when the menu button is touched regardless of the current display.
Use the touch operation panel to switch settings.
Monitor
Dust
Deodorizing
Pre Filter
Light Sensor
The brightness of the
operation panel display and
the airflow rate changes
depending on the brightness
of the room.
Note
Buttons do not respond at the moment they are touched.
They respond after you touch them and release your finger.
Button operation may have a different reaction depending on the surrounding temperature and humidity, physical condition
of the user (such as body temperature and sweat), and the condition of the electronic appliances near by the unit.
If a button does not respond, touch it again and release your finger.
If the interval between touches is short, the unit may respond incorrectly.
The sensitivity will not change by the force applied when touching.
There may be no response if the operation panel is wet or dirty.
Wipe off with a dry cloth to use.
The operation panel display may be difficult to view if the unit is placed in brightly lit places such as near a window
with direct sun light.
E-6
EP-PF120J_EN.indd 6
EP-PF120J_EN.indd 6
Notification Display
Displays the amount of PM2.5, the odor & TVOC level, and remaining time of the timer.
Displays the set time of the off timer.
Displays the estimated cleaning and replacement periods of each filter as a percentage.
Displays notification contents that came out while operating.
Example:
(P.E-31)
The indicator lights up when the child lock is set.
The indicator lights up when the unit is operating on timer.
The indicator flashes when it is time to replace the dust filter.
The indicator flashes when it is time to replace the deodorizing filter.
The indicator flashes when it is time to clean the pre-filter.
Display
(P.E-25)
Switch between displaying
PM2.5, Odor & TVOC and Timer.
(P.E-20)
Change the display details of the
touch operation panel. (Hold for
about 3 seconds)
(P.E-18)
to display it again.
is touched again.
(P.E-20)
(P.E-21)
Dimmer
Timer
•
Use this to set the off-timer.
(P.E-20)
Child Lock
(Touch and hold for about 3 seconds)
Use this to prevent incorrect
operation.
(P.E-20)
(P.E-22)
(P.E-20)
(P.E-23)
(P.E-23)
(P.E-23)
Child Lock
•
(P.E-21)
2/11/2019 3:36:20 PM
2/11/2019 3:36:20 PM
- Quick Links:
- Pre-Fi Lter
Hide quick links:
Advertisement
Table of Contents
