Table of Contents
Advertisement
MN004476A01-AE
Chapter 6: Advanced Features
3
or
to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4
or
to [All Avail] and press the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req successful.
5 To return to the Home screen, press the Menu Select button directly below Exit.
The SSA Alert for all available sites stop.
6.23
Wi-Fi
You can connect your radio to a Wi-Fi network for wireless programming. Your service administrator
preprograms the Wi-Fi Service Set Identifier (SSID) or network name that your radio can connect to.
6.23.1
Turning Wi-Fi On or Off
When and where to use: Do one of the following to turn Wi-Fi on or off. You can use the options
interchangeably depending on your preference and the programmed functions.
Procedure:
•
Turning Wi-Fi on or off using the preprogrammed button:
a. To toggle the Wi-Fi on or off, press the preprogrammed Wi-Fi button.
This button must be preprogrammed by a qualified radio technician. Check with your dealer
or system administrator for more information.
•
Turning Wi-Fi on or off using the radio menu button:
a.
or to WiFi and press the Menu Select button directly below WiFi.
-
If the display shows WiFi Status being Off, press the Menu Select button directly
below On.
-
If the display shows WiFi Status as Searching, Connecting, Connected or No
Service, press the Menu Select button directly below Off to turn Wi-Fi off.
6.23.2
Selecting WiFi Network
This feature allows you to view and select the available WiFi network.
Procedure:
1 Press the Menu Select button directly below WiFi to enter WiFi screen.
2 Press the Menu Select button directly below On to turn on the WiFi.
Radio starts searching for available network.
3 Press the Menu Select button directly below List.
114
Advertisement
Table of Contents
