Advertisement
Available languages
Available languages
STEP 1
Mounting the Hinge
Bracket
Mount the hinge to the left
side of the wall opening. The
Side Bracket must be plumb
(vertical).
Secure with four #8 x 1 1/4"
pan head screws.
NOTE: Hinge tabs must point
upward.
STEP 2
Mounting the Door on the Side
Bracket
Install the door onto the
Side Bracket.
Be sure that the access
door had engaged
the three tabs and the
door is against the side
mounting bracket.
STEP 3
Close the door. Draw a temporary horizontal
reference line on the wall adjacent to the center of the
latch mounting hole.
Latch mounting
hole in door
Installation Instructions
Draw
Reference
Line on Wall
STEP 4
Latch Bracket Installation
Attach the Latch
Bracket to the
opening.
Align the bottom of
the bracket with the
reference line.
Use 2 #18 x 1 1/4
screws.
DO NOT
OVERTIGHTEN.
STEP 5
Installing the Latch Bracket
Slide the bracket upward and
tighten the mounting screws.
STEP 6
Adjust the Latch
NOTE: The latch mechanism
is factory mounted.
The latch arm is adjustable
to provided secure, rattle-free
installation. Install the filter.
1. Loosen the latch arm nuts
and latch arm and adjust
as needed.
2. Tighten the latch arm nuts.
3. Install the filter on back of
acess panel.
Orientation
Markings
FRONT VIEW
2
Reference
Line
Access
Panel
Latch Arm
Latch
Mechanism
SIDE VIEW
Printed in the United States.
Advertisement
