Resetting devices
RST
This instruction turns off the specified device.
ST
ENO:=RST(EN,d);
■Execution condition
Instruction
RST
Setting data
■Description, range, data type
Operand
Description
(d)
Reset target bit device number, bit specification of word device
EN
Execution condition
ENO
Execution result
■Applicable devices/labels
Operand
Bit
SB
(d)
Processing details
• This instruction changes the device status as follows when the execution command turns on.
Device
Bit device
Bit-specified word device
• When the execution command is off, the device status does not change.
• Data except bit type can not be specified in the RST instruction.
Operation error
There is no operation error.
5 SEQUENCE INSTRUCTIONS
58
5.1 Output Instructions
Execution condition
RX, RY, LB
Range
Word
SW
G, RWw, RWr, LW
Status
Turns off the coil or contact.
Sets the specified bit to 0.
Data type
ANY_BOOL
BOOL
BOOL
Constant
K, H