Sony WF-1000XM3 Service Manual page 15
Wireless noise canceling stereo headset with charging case
Hide thumbs
Also See for WF-1000XM3:
- User manual ,
- Help manual (99 pages) ,
- Quick start manual (9 pages)
Advertisement
WF-1000XM3
16. Check that "Success!" is displayed on the screen of the smart-
phone and tap "OK" button.
Check
Tap
Note 7: When "Success!" is not displayed, refer to "3. Error Display" on
page 16.
Note 8: In the step 15, if you touch the charging case other than the one for
repair, such as the charging case before replacement, an error will
be displayed. In this case, restart from step 15 again.
17. Tap the "Read" button.
Tap
18. In the state of step 17, touch the N-mark part of the smartphone
to the N-mark part of the charging case.
19. Check that "BD_ADDR" displayed on the screen of the smart-
phone matches the Bluetooth address checked in step 1 and the
"MODE" column is "0000 (Read-only)".
20. End the NFC Tag Data Writing Application.
15
Check
21. Check the operation of connecting smartphone and this unit with
NFC function.
(Refer to "OPERATION CHECK OF THE NFC FUNCTION
AFTER COMPLETING THE REPAIRS" on page 5)
22. Complete writing the NFC tag data.
Refer to the following as necessary.
"3. Error Display" (page 16)
"4. Check Method of the NFC Tag Data" (page 17)
"5. The Factor that One Touch Connection (NFC function) is Impos-
sible" (page 18)
Sony CONFIDENTIAL
For Authorized Servicer
SYS SET
Hide quick links:
Advertisement
