Table of Contents
Advertisement
1-4. Installation of Option Boards
4. Fix the BKMA-2010 using the two screws that were
securing the blank panel and the supplied two screws.
5. Attach the BKMA-2010 (DPR board) in the same way.
6. Change the combination of the blank panels so that all
slots are not released.
Blank panels 4U
7. Fully loosen the three screws (with drop-safe) and
open the front panel.
8. Remove the eight screws (PSW3 x 6) and remove the
board fixing plate.
RK4 x 16
Front panel
x
PSW3
6
1-6 (E)
BVTT3 x 6
Blank panel 2U
BVTT3 x 6
Board fixing plate
9. Insert the BKMA-2010 (DM board) into the slot. Push
in the board in the direction of the arrow to connect it
to the mother board completely.
10. After connecting the board, push the levers in the
direction of the arrow to lock them.
11. Attach the board fixing plate.
Lever
12. Unlock the stopper on the front panel, close the front
panel, and tighten the three screws (with drop-safe).
Stopper
Stopper
DM board
Lever
MAV-2000
Advertisement
Table of Contents
