Table of Contents
Advertisement
5.2 Connect electrodes to lead wires
Insert the lead wire connector into electrodes connector. Make
sure no bare metal of the pins is exposed.
Caution:
Always use the electrodes CE mark, or which are legally
marketed in the US under 510(K) procedure.
5.3 Connect lead wires to the device
Before proceeding to this step, be sure the device is completely
turned OFF. Holding the insulated portion of the lead wire
connector, insert the plug into the receptacle on the top of the
main unit. Ensure the lead wires are inserted correctly. The
device has two output receptacles controlled by Channel 1 and
Channel 2. You may choose to use one channel with one pair of
lead wires or both channels with two pairs of lead wires. Using
both channels gives the user the advantage of stimulating two
different areas at the same time.
14
Hide quick links:
Advertisement
Table of Contents
