Miele G 8066 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dishwasher
  5. G 8066
  6. Operating instructions manual

Miele G 8066 Operating Instructions Manual

Commercial
Hide thumbs Also See for G 8066:
Table of Contents

Advertisement

Quick Links

Operating instructions
Commercial dishwasher
G 8066
en - CA
To prevent accidents
and machine damage
read these instructions
before
installation or use.
M.-Nr. 06 868 503

Advertisement

Table of Contents
loading

Related Manuals for Miele G 8066

Summary of Contents for Miele G 8066

  • Page 1 Operating instructions Commercial dishwasher G 8066 en - CA To prevent accidents and machine damage read these instructions before installation or use. M.-Nr. 06 868 503...

  • Page 2: Table Of Contents

    G 8066 WES DOS ........
  • Page 3 Contents Program guide ........... 32 Programming special functions .

  • Page 4: Safety Instructions And Warnings

    Safety Instructions and Warnings Operating personnel must receive This appliance meets the pertinent regular instruction. Personnel who have safety regulations. However, not received instruction in handling the improper use may cause property commercial dishwasher must be damage and personal injury. prohibited from using it.
  • Page 5 Miele Service. appliance. Installation and maintenance work or Replace defective components with repairs must be performed by original Miele parts only. Only with authorized technicians only. those parts does the manufacturer Improper installation and maintenance warrant that they meet the safety work or repairs may cause significant requirements.
  • Page 6 Safety Instructions and Warnings Disconnect the appliance from the Use dish detergent for commercial electric power supply during dishwashers only! Using other dish installation, maintenance and repair detergents may damage the load or the work. It is only properly disconnected commercial dishwasher.
  • Page 7 Organic by Miele Service, otherwise subsequent solvents must NOT be used as, damage will no longer be covered by amongst other things, there is a risk of the warranty.
  • Page 8 Accessories Installation of the appliance in Only accessories expressly allowed non-stationary locations (for example, by Miele may be mounted or installed. on ships) may only be performed by a Mounting or installing other parts will qualified technician and only after...
  • Page 9 Safety Instructions and Warnings Disposal of the commercial dishwasher For safety and environmental reasons, dispose of all detergent residues in accordance with the pertinent safety regulations (wear safety glasses and gloves!). Remove or destroy the door latch to prevent children from locking themselves inside.

  • Page 10: Description Of The Machine

    Description of the machine This Miele appliance is a commercial – G 8066 WES DOS with two internal dishwasher with a tank system, short dispensing pumps for detergents program durations and a large cleaning and rinse aid, a container for these...

  • Page 11: Guide To The Machine

    Guide to the machine Control panel a On button j "Add rinse aid" indicator, applies only to machines equipped with b Off button external rinse aid dispensing c DRAIN program button k "Drain fault" indicator d SHORT program button l "Check water inlet" indicator e STANDARD program button m "Reactivation in progress"...

  • Page 12: Overview

    Guide to the machine Overview a Connection for DOS module d Fine filter (Dispensing system for liquid e Spray arms detergent) on the rear right hand f Salt reservoir, applies only to WES side, applies only to machines without a built-in dispensing system DOS machines with a built-in water softener (DOS).
  • Page 13 Guide to the machine G 8066 WES DOS a Service panel b Detergent level indicator c Handle to open the service panel d Rinse aid level indicator...

  • Page 14: Before Using For The First Time

    Inadvertently filling the salt reservoir with dishwashing detergent will damage the water softener. Make sure that only water softener reactivation salt of the proper grain size is used. Only use Miele water softener salt.

  • Page 15: Opening And Closing The Door

    Opening and closing the door To open the door To close the door ^ Open the door with the handle. ^ Lift the door upwards and push until it clicks shut. The door should only be opened during operation for emergencies, e.g. if items are knocking together or if a program fault is indicated in the display (see "Cancelling a program").

  • Page 16: Water Softener (Optional)

    Water softener (WES) (optional) Important! The built-in water softener Applies only for machines with a has settings from 1 gr/gal to 35 gr/gal built-in water softener. (20 - 630 ppm CaCO3). If the water hardness is above 30 gr/gal To achieve good cleaning results, the (540 ppm CaCO3) an external water dishwasher needs to operate with soft softener unit (e.g.

  • Page 17: Setting The Water Softener

    Water softener (WES) (optional) Setting the water softener Settings ^ Turn the machine off with the Z gr/gal Value displayed CaCO3 button. ^ Press and hold the A and 6 button, at the same time turn the machine on with the main switch Y. The display shows the current program status P...

  • Page 18: Filling The Salt Reservoir

    Filling the salt reservoir Only special, coarse-grained reactivation salt* should be used in this machine. *Available from Miele. Please see back page for more information. Do not use other types of salt, e.g. table salt, agricultural or gritting salt. These...
  • Page 19 Water softener (WES) (optional) If the machine is used afterwards Starting the rinsing process manually ^ Press one of the program buttons. If you refill the regeneration salt and do Any traces of salt are diluted and rinsed not immediately start a new wash away.

  • Page 20: Add Salt Indicator K

    The number of remaining wash cycles until the next regeneration can be displayed. Miele Service can activate that function for the G 8066. The number of remaining wash cyles is displayed when you: – open/close the door, – push the button of the active wash...

  • Page 21: Adding Rinse Aid

    Add rinse aid indicator H For sparkling results Miele recommends to use process chemicals supplied by Miele. G 8066 This model is equipped with a built-in rinse aid dispensing pump.

  • Page 22: G 8066 Wes Dos

    Adding rinse aid G 8066 WES DOS Add rinse aid indicator This model comes standard with a built-in dispensing pump and a reservoir for rinse aid. The reservoir is located on the inner right hand side of the service panel and holds approximately 8.5 oz (250 ml).

  • Page 23: Use

    Loading the machine Important – Select baskets and inserts which are Removing excess soils appropriate for the application. ^ Scrape food from dishes before – Load items so that water can reach placing them in the dishwasher. all surfaces. Inadequate pre-cleaning can clog –...

  • Page 24: Items Not Recommended For Dishwashing

    Items not recommended for Important dishwashing – Silver and aluminum items may tarnish – Cutlery with wooden or bone handles – Clouding or etching may occur on – Wooden or plastic cutting boards glassware after frequent washing – Plastic items that are not heat resistant (see also Special programs with a lowered rinse temperature) –...
  • Page 25 Because of the large diversity of inserts and baskets not all can be shown. Call Miele for more info. The following illustrations show the most popular baskets with examples of loading plates, cups and cutlery.

  • Page 26: Adding Detergent

    Adding powder detergent additives may be necessary. Contact Miele’s Professional Department for advice. Miele recommends to use process chemicals supplied by Miele for excellent cleaning results. ^ Place powder detergent directly to the inside of the door.

  • Page 27: Adding Liquid Detergent

    Adding detergent Detergent indicator v Adding liquid detergent The optional DOS Module G 60 is needed for dispensing liquid detergent. ^ See "Programming special functions" to set the concentration level and to vent the dispensing system. The detergent container holds approx. 1.3 gal (5 liters) of detergent and is connected to the dishwasher by a siphon tube.

  • Page 28: G 8066 Wes Dos

    Maintenance of the dispensing systems ^ Open the service panel with the handle. Every 12 to 18 months by Miele Technical Service ^ Take the blue cap off the filler spout. ^ Replace the DOS module siphon ^ Using the supplied funnel fill the tubes or for machines with integrated container with detergent.

  • Page 29: Use

    When the boiler and tank are filled and Filling the tank and heating the the operating temperature has been water reached, the Start 6 indicator flashes ^ Close the door. and the duration for the selected program is displayed in minutes. ^ Open the water supply.

  • Page 30: Selecting A Program

    G 8066 WES DOS The k indicator will be displayed, Starting a program when the automatic reactivation ^ Press the "Start" 6 button.

  • Page 31: Changing A Program

    Changing a program Turning off ^ Select the 6 DRAIN program. If the selected program has not yet been started: The water will be drained away. At the ^ Press the desired wash program end of the program. button. ^ Press the Z button. ^ Press the "Start"...

  • Page 32: Program Guide

    Program guide Program 1) Powder detergent 2) Follow manufacturers instructions For heavily soiled dishes with dried 40 g on the inside of the door INTENSIVE on food Add 20 g (1 ½ tablespoon) 3 min after every five programs. For normally soiled dishes 40 g on the inside of the door STANDARD Add 20 g after every five...
  • Page 33 Program guide Program 1) Program cycle Main wash Run-off Final rinse 3) 4) 3) 5) INTENSIVE 149°F/65°C 5 sec 194°F/90°C 3 min 160 sec 10 sec STANDARD 149°F/65°C 5 sec 194°F/90°C 2 min 100 sec 10 sec SHORT 149°F/65°C 5 sec 194°F/90°C 1.5 min 70 sec...

  • Page 34: Programming Special Functions

    "Value set: ___________". G 8066 When special function settings are changed or the dispensing systems are The models G 8066 and G 8066 WES primed, the dishwasher will DOS are designed for use with powder automatically be drained. To save detergents.
  • Page 35 0, 1, 2 or 3. program status P..0 = powder detergent placed on the The p indicator lights. inside of the door (G 8066) ^ Press the y button twice. The 1 = liquid detergent dispensed via the display shows 2 (programming built-in dispensing pump, Option 1 level 2).
  • Page 36 Programming special functions 1.2 Setting the detergent dosage If you do not want to make any other setting changes in this programming concentration level level, proceed to step 1.4. If the dispensing method has been programmed for liquid detergent, you can adjust the dispensing concentration.

  • Page 37: Dos 2 Rinse Aid Dosage Concentration Level And Venting The Dispensing System (Programming Level 3)

    0 = Built-in pump, container external (G 8066) Value set: 1 = Built-in pump and container (G 8066 WES DOS) If you do not want to make any other setting changes in this programming ^ Press the A button until the desired level, proceed to step 2.4.
  • Page 38 Programming special functions 2.3 Venting the dispensing system 2.4 To save your changes ^ Select programming level 3. ^ Press the 6 button. The display shows SP. ^ Press z until 3.03 is displayed. ^ Press the 6 button again. The ^ Press A.

  • Page 39: Setting The Main Wash Or Final Rinse Temperature And/Or Final Rinse Duration (Programming Level 4)

    Programming special functions 3. Setting the main wash or Accessing programming level 4 final rinse temperature and/or ^ Turn the machine off by pressing Z. final rinse duration ^ Press and hold the A and 6 button (Programming level 4) and at the same time turn the machine on with the main switch Y.
  • Page 40 Programming special functions 3.2 Setting the offset range of the 3.3 Selecting the final rinse duration final rinse temperature ^ Select programming level 4. ^ Select programming level 4. ^ Press z until 4.03 is displayed. ^ Press z until 4.02 is displayed. ^ Press A once, the display shows ^ Press A once, the display shows the current setting 10.

  • Page 41: Buzzer (Programming Level 5)

    Programming special functions 4. Buzzer 4.1 Setting the buzzer (Programming level 5) ^ Press z until 5.01 is displayed. Programming level 5 allows you to ^ Press A once, the display shows activate a buzzer to sound at the end of the current setting 0.

  • Page 42: Altering The Program Duration (Programming Level 6)

    Programming special functions 5. Altering the program Accessing programming level 6 duration (Programming level 6) ^ Turn the machine off with the Z button. The program duration can be set between 75 and 480 seconds. ^ Press and hold the A and 6 button, at the same time turn the machine Lengthening the program duration on with the main switch Y.
  • Page 43 Programming special functions 5.2 Altering the STANDARD program 5.3 Altering the INTENSIVE program duration duration ^ Select programming level 6. ^ Select programming level 6. ^ Press z until 6.02 is displayed. ^ Press z until 6.03 is displayed. ^ Press A once, the display shows ^ Press A once, the display shows the current setting 120.

  • Page 44: Resetting The Factory Default Settings

    Programming special functions 6. Resetting the factory default 6.2 To save your changes settings ^ Press 6. The display shows SP. All settings can be reset to the factory ^ Press the 6 button again. Values default settings in Programming level 7. which had been changed are now To do this you must first select the reset.

  • Page 45: Cleaning And Care

    Cleaning and Care Cleaning the wash cabinet, Filters tank and filters The water in the tank may be hot. Before taking the filters out, the Wash cabinet and tank water in the tank must be drained away. Once a day ^ The tank should be checked and Be careful - glass splinters in the cleaned regularly depending on the...
  • Page 46 Cleaning and Care Flat filter Fine filter ^ Take the front filter out first, by lifting ^ Remove the flat filters. it up a little at the front. ^ Turn the fine filter counterclockwise ^ Remove the rear filter, by lifting it up to remove it from the drain.

  • Page 47: Cleaning The Control Panel

    Cleaning and Care Cleaning the control panel Cleaning the spray arms ^ Only clean the control panel with a Sometimes particles get stuck in the damp cloth, a plastic cleaner or spray arm jets. disinfectant. The spray arms should be inspected and cleaned every 4 - 6 months.

  • Page 48: Cleaning The Drain Pump And Non-Return Valve

    Cleaning and Care Cleaning the drain pump and The non-return valve is beneath the drain pump a. non-return valve If water has not been drained at the end of a program the drain pump and the non-return valve may be clogged. The water in the tank may be hot.

  • Page 49: Cleaning The Water Inlet Filters

    Cleaning and Care Cleaning the water inlet filters To protect the water inlet valve, filters are incorporated in the intake hose attached to the water supply. If the filters are soiled they must be cleaned to ensure sufficient water intake to the wash cabinet.

  • Page 50: Frequently Asked Questions

    Frequently asked questions With the aid of the following guide, minor problems can be fixed without a service call. Repairs should only be carried out by Miele Service in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.
  • Page 51 Frequently asked questions Issue Possible fault Solution The wash cycle finishes Before fixing the fault: too early and the 6 – Turn the machine off with the Z button. indicator flashes (fault code F..A appears The filters in the wash Clean the filters.

  • Page 52: Poor Cleaning Results

    Frequently asked questions Poor cleaning results Issue Possible fault Solution Dishes are not clean The dishes were not Load items so water can loaded correctly. reach all surfaces. See "Use - Loading the machine" for more information. The program was not Select a more powerful powerful enough.
  • Page 53 Frequently asked questions Issue Possible fault Solution White residue is visible Not enough rinse aid was Use more rinse aid, see on cutlery and dishes, used. "Programming special clouding occurs on functions". glassware and film can The salt reservoir is Replenish reactivation be wiped off empty.
  • Page 54 Frequently asked questions Further fault codes If fault codes are displayed which are not described in the table: ^ Turn the machine off by pressing Z. ^ Turn the machine on again with Y. ^ Start the DRAIN 6 program. ^ Select a wash program to fill the dishwasher’s boiler and tank.

  • Page 55: After Sales Service

    In the event of a fault which you cannot correct yourself or if the fault code "F..." shows in the display field please contact the Miele Service Department at the phone number on the back of these instructions. ^ Please quote the model and serial number of your machine.

  • Page 56: Installation Instructions

    Installation Instructions To prevent accidents and machine damage read these instructions before installation or use.

  • Page 57: Installation

    Depending on the requirements for an undercounter installation, a steam Leveling the machine deflector can be ordered from the Miele ^ The dishwasher needs to stand even. Technical Service Department. It can be leveled with the four height The underside of the countertop is adjustable feet.
  • Page 58 Installation Removing the lid If necessary, remove the lid from the machine to make installation possible. ^ Open the door. ^ Remove the fixing screws on the left and right sides using a Phillips head screwdriver. ^ Pull the machine lid approx. 5 mm forwards, lift it upwards and remove.

  • Page 59: Electrical Information

    ) is provided on the back of ^ A damaged power cord must only be the machine for grounding. replaced with a genuine Miele cord by a Miele Service Technician. Electrical rating: 208Vac, 60Hz, 6.2 kW, 3 ph, 20 A Convertible to: 208Vac, 60Hz, 6.2 kW, 2 ph, 30 A...

  • Page 60: Plumbing

    145 psi. If the water pressure (flow pressure) is not between 14.5 and 145 psi, contact Miele’s Technical Service Dept. The indicator p - Fault code "F2E" may Do not cut the inlet hose or damage it in any way.

  • Page 61: Drainage

    – The machine should preferably be – A longer drain hose (up to 13 ft. connected to a separate drainage [4 m] long) is available from Miele. system onsite. If separate drainage is not available – The drainage system must not contact your Miele application exceed 13 ft.

  • Page 62: Technical Data

    Technical Data Imperial Metric Height: " (32 ") 85 (82) cm Width: " 60 cm Depth: " 60 cm Voltage: see data plate Power cord approx. 5’ 9" 1.8 m Water pressure (flow rate): 14.5 - 145 psi Cold or Hot water connection up to max.

  • Page 63: Help To Protect The Environment

    Help to protect the environment Disposal of the packing Disposal of the appliance material Appliances contain materials which can be recycled. Please contact your local The protective packing materials are authorities about recycling in your area. environmentally safe and can be recycled.
  • Page 64 Alteration rights reserved / Publication date: 2014-05-14 M.-Nr. 06 868 503 / 00...

Table of Contents