16. REGISTRATION MODE
6.
After calling the PLU, touch the [PRESET COUNT] key and input the number of labels to be
issued.
(Refer to Step 3.)
NOTES:
1. Repeating Steps 5 and 6 allows specifying up to 30 PLUs.
2. To cancel the specified PLU individually, input 0 and touch the Count area of that PLU.
(e.g.: To delete PLU No. 910001, Orange) The cancelled PLU is deleted and list is shifted up.
7.
After specifying all of the PLU's and the number of labels to be issued, touch the [PRINT] key. The
display will change to the Registration Mode initial screen, issue the 1
AUTO/MANUAL Mode setting) and display "PRESS * TO PRINT". If Label Issue Mode is set to
MANUAL, you must remove the printed label and press the [PRT/*] key to issue the next label.
This process is repeated until all programmed labels are printed. If Label Issue Mode is set to
AUTO, when the 1
repeated until all programmed labels are printed.
During printing
st
label printed is removed the next label is automatically issued. This process is
CLEAR key
PRINT
key
Completion of the printing
VOID key
PRT/* key
16-37
EO1-31009
16.3 By-Count Operation
st
label (regardless of the