Table of Contents
Advertisement
Symptom
The screen was tapped, but
there is no response. The
operation button does not
work either.
The screen is dark.
The screen is hard to see.
Can not connect to your
computer.
ActiveSync does not
function when your
Pocket PC is connected to
your computer with a USB
cradle or USB cable.
Following message is
displayed. "Not Enough
Battery Power. USB
devices cannot be used.
Because PDA's battery
power is low"
Following message is
displayed. "TOO MUCH
USB CONNECTION".
Connecting USB devices
are too much."
Following message is
displayed. "USB OVER
CURRENT DETECT USB
device is turned off. Please
disconnect USB device."
User's Manual
Cause
Unresponsive operating
system
The screen light is off.
Brightness setting is
incorrect.
—
The USB driver of your
computer may not be
compatible.
The battery power is too
low to use USB devices.
The total power
consumption of
connected USB devices
is too large.
The total power
consumption of
connected USB devices
is too large.
Additional Information
Correction
Reset the system. If no
action is observed after
resetting the system, initialise
the system. (NOTE: YOUR
DATA WILL BE DELETED.)
Press and hold the power
button until the screen light is
turned on or touch the
screen with the stylus.
Select
, Settings, System,
Screen light to adjust the
screen brightness for better
sight.
See Help of ActiveSync.
Reselect the USB driver.
Charge the battery or
connect AC adapter.
This USB port supports total
500mA USB device. Confirm
connected USB device.
This USB port supports total
500mA USB device. Confirm
connected USB device.
To enable USB port again,
turn off the power of Pocket
PC or push Reset Button.
9-2
Advertisement
Table of Contents
