Parameters - Siemens SIMATIC S7-1500 Manual
Power supply module, 6es7505-0rb00-0ab0
Hide thumbs
Also See for SIMATIC S7-1500:
- System manual (523 pages) ,
- Function manual (402 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
Parameters
4.1
Parameters
Parameters of the PS 60W 24/48/60VDC HF
The PS 60W 24/48/60VDC HF is usually already integrated in the hardware catalog of
STEP 7 (TIA Portal). In this case, STEP 7 (TIA Portal) checks the configured properties for
plausibility during configuration.
However, you can also assign parameters to the module by means of a GSD file and the
configuration software of any provider. The module does not check the validity of the
configured properties until after the configuration has been loaded.
When you assign the module parameters in STEP 7, you use various parameters to specify
the module properties. The following table lists the configurable parameters. The effective
range of the parameters that can be set depends on the type of configuration. The following
configurations are possible:
● Central operation with an S7-1500 CPU (with STEP 7 TIA Portal V14 SP1 or higher)
● Distributed operation on PROFINET IO in an ET 200MP system (with GSD file
PROFINET IO in STEP 7 (TIA Portal) V12 or higher or STEP 7 V5.5 SP3 or higher
For parameter assignment in the user program, the parameters are transferred to the
module using the WRREC instruction (reparameterization in RUN) and data records; see
section Parameter data record (Page 24).
Table 4- 1
Configurable parameters and their defaults
Parameters
Diagnostics / mainte-
nance
Supply voltage moni-
•
toring *
Switch position Off *
•
* In case of central operation of a S7-1500 CPU with firmware V2.1.0 or higher the diagnostics are not displayed in the
diagnostics buffer to ensure reliable backup of the extended retentive data.
Power supply module PS 60W 24/48/60VDC HF (6ES7505-0RB00-0AB0)
Manual, 01/2019, A5E39450002-AB
Range of values Default setting
Yes/No
No
Yes/No
No
Parameter as-
Scope with configuration software,
signment
in RUN
Integrated in the
hardware cata-
log STEP 7
(TIA Portal) V14
SP1 or higher or
GSD file
PROFINET IO
Yes
Module
Yes
Module
e.g., STEP 7 (TIA Portal)
GSD file
PROFIBUS DP
---
---
4
15
- Quick Links:
- Properties
- Wiring
Hide quick links:
Advertisement
Table of Contents
