Table of Contents
Advertisement
10.6.2.2 Controlling the
Answering Machine from
an external call
From your external phone, dial
home.
• The answering machine answers
and starts playing your greeting
message.
Press # key and enter the remote
access code (same as your PIN
code).
• If the access code is incorrect, an
error tone will be emitted. Then
enter the PIN code again. If the
PIN code is still incorrect, the
answering machine will drop the
line immediately.
• If the remote access code is
correct, a short validation tone
will be heard.
Note
Operation is cancelled if the PIN code is
not entered within 8 seconds.
If the answering machine is off, the phone
will enter into the remote access mode
after 10 rings. A beep will then sound,
prompting you to enter the PIN code.
Enter the PIN (default is 0000) to
activate the remote access feature. You
can then turn ON the answering machine
and play the recorded messages.
The following table indicates how to
access the functions of the answering
machine using the telephone keypad.
Key
Action
1
Go to previous message.
2
Play the message.
3
Skip to the next message.
Telephone answering machine (TAM)
Key
Action
6
Delete the playing message.
7
Turn on the answering
machine.
8
Stop message playback.
9
Turn off the answering
machine.
10.6.3 Handset Screening
When Handset call screening is set to
On, you can press o Screen to start
call screening for incoming messages. If
you decide to pick up the call, press t.
Once you pick up, the recording will stop
automatically.
Note
If you have multiple handsets, only one
handset can enable handset call screening
for each call.
Press the m key in idle mode,
scroll n to Answer Machine, and
press o Select.
Scroll n to Settings and press
o Select. Then, scroll n to HS
Screening and press o Select.
Scroll n to select On or Off and
press o Select.
• A validation tone is emitted and
the screen returns to Settings
menu.
10.6.4 Setting the Outgoing
Message Language
The language of the default outgoing
messages corresponds to the country
selected. However you can change the
language of the default outgoing
messages as follows.
61
Advertisement
Table of Contents
