Setting The Vlan Parameters - Panasonic KX-TDA30 Manual
Ip proprietary telephones hybrid ip-pbx
Hide thumbs
Also See for KX-TDA30:
- Features manual (472 pages) ,
- Installation manual (428 pages) ,
- User manual (258 pages)
Table of Contents
Advertisement
4.2.2 Setting the VLAN Parameters
4.2.2 Setting the VLAN Parameters
To establish voice communications between IP-PTs, the primary ports of the IP-PTs and the connected PBX
must belong to the same VLAN. Consult your network administrator and obtain the appropriate VLAN ID.
If you are using an IP-PT with 2 ports, it is possible to place primary and secondary ports on different VLANs
by assigning separate VLAN IDs to each port.
Follow the procedure below for all IP-PTs on the network, using appropriate VLAN IDs.
IP-PTs with a multiline display (e.g., KX-NT300 series [except KX-NT321])
After assigning
the IP addresses
To set the VLAN ID for the primary port
Select "Primary port".
ENTER
To set the VLAN ID for the secondary port
Return to the
VLAN setting screen.
VLAN ID
1–4094
To end programming
Return to the
Menu screen.
*1
The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
the priority.
46
Information about IP Proprietary Telephones
KX-NT300 series only
Select "QoS".
ENTER
ENTER
Select "VLAN Priority".
ENTER
Select
"Secondary port (TO PC)".
ENTER
Select
"VLAN Priority".
STORE
Press "STORE".
Select "VLAN".
Select "VLAN ID".
ENTER
VLAN Priority*
0–7
ENTER
Select "VLAN ID".
ENTER
The IP-PT will reboot
and establish connection
to the network.
ENTER
Select "Enable" for
VLAN setting.
VLAN ID
1–4094
1
ENTER
ENTER
1
VLAN Priority*
0–7
ENTER
Advertisement
Table of Contents
Troubleshooting
