Table of Contents
Advertisement
Disassembling the Camera
Note: This process is the same for both surface and in-ceiling mounted cameras. In-ceiling mount is
shown in the following figures.
1. Insert a flat head screwdriver into the small slot in between the camera shroud and mounting adapter.
Twist the screwdriver to release the camera shroud from the mounting adapter.
2. Rotate the camera to access the slot on the other side. Insert a flat head screwdriver into the slot and
twist it to release the camera shroud from the mounting adapter.
3. Pull the camera shroud down and away from the camera after both sides have been released.
Disassembling the Camera
34
- Quick Links:
- Connecting to the Camera
Hide quick links:
Advertisement
Table of Contents
