Muffler Kit
100 Series Z Master
Part No. 105–3634
Part No. 105–3635
Part No. 105–3636
Important
Your machine must have a tailpipe extension installed. See figure 1. If this tailpipe extension is not installed,
contact an Authorized Service Dealer.
For a domestic machine, the tailpipe extension is in an Exhaust Kit, part number 105–9361.
For an international machine, the tailpipe extension is in an Exhaust Kit, part number 105–9371.
1
2
Figure 1
1. Tailpipe extension
Loose Parts
Note: Use the chart below to identify parts for assembly.
Description
Muffler
Gasket
Warning
Components around engine will be hot if the
machine has been running. Touching hot
components can cause burns.
Do not touch engine components when hot.
Allow engine to cool before performing
maintenance.
2002 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
m–5842
2. Muffler
Qty.
Installation Instructions
1
Installing the muffler
2
Installing the Muffler
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Allow the traction unit to cool completely.
4. Remove the tailpipe extension from the muffler (Fig. 1).
Note: The muffler must have the tailpipe extension. If
needed, contact an Authorized Service Dealer to order the
tailpipe extension (Fig. 1).
1
Form No. 3327-879
Use
All Rights Reserved
Printed in the USA