Execution From External Memory (Ees) - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Execution from external memory (EES)

The "Execution from external storage" function allows you to directly execute any size of part

program from an appropriately configured drive. The behavior is the same as that for execution

from the NC part program memory without the restrictions that apply to "EXTCALL".

Not possible to teach-in program

When an EES program has been selected, it is not possible to teach-in programs.

You have the option of processing the G code programs saved on the configured external

drives as usual in the editor.

When executing the G code programs, you obtain a current block display, as usual. You can

edit the programs directly in the Reset state.

In addition to the current block display, you can also show a basic block display. You can make

corrections with the "Program correction" function, as usual.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Software option

You require the "CNC user memory extended" software option in order to use this

function in the user memory (100 MB) of the CompactFlash card.

Software option

In order to use this function without restrictions, e.g. for a network drive or a USB

drive, you require the "Execution from external storage (EES)" software option.

Machine manufacturer

Please refer to the machine manufacturer's instructions.

14.15 Execution from external memory (EES)

Managing programs