Panasonic AFPX-COM5 User Manual page 6
Hide thumbs
Also See for AFPX-COM5:
- Specifications (25 pages) ,
- Specifications (25 pages) ,
- Upgrade procedure (3 pages)
Advertisement
7.7.3 Communication Tool Software Configurator WD
The communication tool software "Configurator WD" is required to set Ethernet communication for the
AFPX-COM5. Install the Configurator WD before setting the AFPX-COM5.
The Configurator WD can be downloaded from our website free of charge.
http://www.mew.co.jp/ac/fasys/ (Member registration is required. Free of charge)
The setting is saved in the AFPX-COM5.
IP address setting
Item
Unit name
Unit name for Communication cassette AFPX-COM5 can be specified. FPX_ET
IP address of Communication cassette AFPX-COM5
IP address
Set an IP address other than 0.0.0.0 and 255.255.255.255.
Subnet mask
Netmask of Communication cassette AFPX-COM5
Gateway
Gateway of Communication cassette AFPX-COM5
Communication setting
Item
Communicati
on mode
Action mode
Common
setting
Baud rate
(COM1)
Source port
No.
Server
setting
Note1)
Time out
Destination
IP
Destination
port No.
Source port
Client
No.
setting
Note2)
Time out
Retry time
Note1) Set when the server mode has been selected for the action mode.
Note2) Set when the client mode has been selected for the action mode.
Reference: Configuration WD Operation Manual <Configurator WD Help → User's Manual>
6
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Description
Communication mode of AFPX-COM5
Select Computer link or General communication.
Connection mode of AFPX-COM5
Select Client mode or Server mode.
When selecting Computer link for Communication mode, Client
mode cannot be selected.
Baud rate for communicating with the COM1 port of FP-X.
Change the baud rate according to the baud rate for the COM1
port of FP-X.
Select 9600 bps or 115200 bps.
Port number that AFPX-COM5 opens.
Setting range: 1025 to 32767
If AFPX-COM5 not communicate with a destination device
during this setting time (seconds) in the state that connection is
established, connection will be cut.
Setting range: 0 to 1800 s When 0 is set, the connection will
not be cut.
IP address of a destination device
Set an IP address other than 0.0.0.0 and 255.255.255.255.
Destination port number of a destination device
Setting range: 1025 to 32767
Source port number of a destination device
Setting range: 0, 1025 to 32767
When 0 is set, optional.
If AFPX-COM5 not communicate with a destination device
during this setting time (seconds) in the state that connection is
established, connection will be cut.
Setting range: 0 to 1800 s When 0 is set, the connection will
not be cut.
When failed in the connection with a destination device.
Setting range: 0 to 1800 s
Description
Default
192.168.1.5
255.255.255.0
192.168.1.1
Default
Computer link
Server mode
9600 bps
9094
0
192.168.1.100
9094
0
0
15
Advertisement
