Table of Contents
Advertisement
[Feature settings]
• [Multi RC]: This function allows that up to
four televisions can be installed in a room
whereas every TV will listen to its own
RC. Once the TV is set, also every RC can
be set to remember its connected TV:
[Off]: This function is not used; all TVs
will listen to a 'blue' RC.
[Blue]: The TV will listen to a 'blue' RC.
Press and hold the blue button for two
seconds.
[Green]: The TV will listen to a 'green'
RC.
Press and hold the green button for two
seconds.
[Yellow]: The TV will listen to a 'yellow'
RC.
Press and hold the yellow button for two
seconds.
[Red]: The TV will listen to a 'red' RC.
Press and hold the red button for two seconds.
• [MyChoice]: With MyChoice it is possible
to activate two channel rings: R0 when
MyChoice PIN is valid, and R1 if not.
[Off]: Single channel map as configured
during channel installation.
[On]: Channel ring R0 to be available
to guest in case of valid PIN entered;
R1 if not.
• [Theme TV]: With ThemeTV it is
possible to activate a customizable UI
to select upto 15 different themes that
contains Channle references. ThemeTV
can be presented on the display by means
of pressing the ThemeTV button on the
RC, or automatically after starting up the
TV:
[Off]: ThemeTV disabled.
[On]: Show ThemeTV on the display
after pressing the Theme TV button on
the RC.
[Startup]: Show ThemeTV on startup
and able to show ThemeTV by pressing
the Theme TV button on the RC.
• [VSecure]: VSecure is the hospitality
content scrambling method used by the
Philips Hospitality TVs. With its internal
VSecure Authorization key a VSecure
Unprotect key can be generated. If this
VSecure Unprotect key is stored in
the TV, the TV is able to descramble
protected content. Loading the VSecure
Unprotect key can be done by USB
memory device or via DVB RF:
• [Mode]:
[Stand alone]: The VSecure Unprotect
key is to be stored once via USB and
will remain available until manual
erasing it.
[RF Static]: The VSecure Unprotect key
is to be stored via RF and will remain
valid until manual erasing it or receiving
a successive VSecure Unprotect key.
[RF Dynamic]: The VSecure Unprotect
key is to be stored via RF and will
remain valid until power down
or receiving a successive VSecure
Unprotect key.
• [Load key to USB]:
[Action]: Place a USB memory device
in the USB side I/O.
Press ► or OK to copy the VSecure
Authorization key to the USB memory
device.
• [Load key to TV]:
[Action]: Place a USB memory device
with a valid VSecure Unprotect key in
the USB side I/O.
Press ► or OK to copy the VSecure
Unprotect key to the USB memory
device.
• [Vsecure self test]:
[Action]: Internal self test to validate
VSecure. After this load proper hotel
specific keys.
EN
35
Hide quick links:
Advertisement
Table of Contents
