3
Black wire
A metal surface of the
car
First connect the black
ground (earth) lead, then
connect the yellow and
red power supply leads.
4
Red wire
The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch
If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Be
sure to connect the black
ground (earth) lead to a
metal surface of the car
first.
5
Green and
Left speaker (Rear)
green/black
wires
6
White and
Left speaker (Front)
white/black
wires
7
Gray and
Right speaker (Front)
gray/black
wires
8
Purple and
Right speaker (Rear)
purple/black
wires
2
Connect the other end of the supplied
standard connector to the car audio
system.
Caution
•
In order to avoid any accident, the driver must
not watch video while driving. This unit is
designed to not allow watching moving video
while driving. Park your car in a safe place and
engage the parking brake before watching
moving video.
12
EN
Note
•
The video blocking system under parking
brake not engaged only control this unit's
display, and will not affect the video output
through the rear RCA video output.
•
If watch moving video from Disc or AV-In
source but parking brake is not properly
connected, the video signal will be blocked
by the system, and the below display will be
shown on TFT: