•
To stop, press
5 Troubleshooting
Warning
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting service. If the
problem remains unsolved, go to the Philips web site (www.Philips.com/support), or contact Philips (see Contact
information). When you contact Philips, ensure that the apparatus is nearby and the model number and serial
number are available .
No power
•
Ensure that the power cord is connected securely.
•
Ensure that there is power at the power supply socket.
•
Ensure that the batteries are installed correctly.
No sound
•
Adjust the volume.
•
Ensure that the track played is of a compatible format.
Display does not function properly./No reaction to operation of any of the controls.
1
Disconnect the AC power cord.
2
Connect the AC power cord after a few seconds.
Cannot play disc
•
Ensure that the disc label is inserted with the printed side facing up.
•
Wipe the disc with fi bre cleaning cloth from the centre to the edge in a straight line.
•
This disc may be defective. Play another disc.
•
Ensure that the CD is a fi nalised CD/CD-R/CD-RW.
•
Ensure that the laser lens is clean.
•
Ensure that the CD is not encoded with copyright protection technologies.
The CD skips tracks
•
Ensure that the CD is not damaged or dirty.
•
Ensure that program/shuffl e mode is deactivated.
Poor cassette sound quality
•
Ensure that heads in the cassette holder are clean.
•
Ensure that a NORMAL (IECI) cassette tape is used for record.
Cassette does not work for record
•
Ensure that cassette tabs are not broken.
.