Using The Visca Rs-422 Connector Plug - Sony BRU-300 Operating Instructions Manual

Optical multiplex unit

Hide thumbs Also See for BRU-300:

Table of Contents

Available languages

Using the VISCA RS-422 Connector

Plug

Insert a wire (AWG Nos. 28 to 18) into the desired

wire opening on the VISCA RS-422 connector

plug, and tighten the screw for that wire using a flat-

head screwdriver.

Wire

Insert the VISCA RS-422 connector plug into the

VISCA RS-422 connector.

To remove the connector plug

Grasp both ends of the VISCA RS-422 connector plug

and pull it out as shown in the illustration.

Notes

• In order to stabilize the voltage level of the signal,

connect both ends to GND.

• When the connections using the VISCA RS-422

connectors are made, the VISCA RS-232C connection

is not available.

• The maximum connection distance with the VISCA

RS-422 connection is approximately 1,200 m (3,937

feet).

Flat-head screwdriver

Specifications

Table of Contents

Chapters

Table of Contents

Bru-300p