Table of Contents
Advertisement
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
» AUTO INSTALL PRESS - PLAY
[
KEY](auto install press - play key) is
displayed.
2
Press
on the main unit to start
installation.
»
The unit automatically stores radio
stations with sufficient signal strength.
»
When all the available radio stations
are stored, the first preset radio station
is broadcast automatically.
Set clock
Note
•
You can set the clock in the standby mode
only.
1
Press and hold PROG/CLOCK SET to
enter the clock setting mode.
» [SET CLOCK] (set clock) scrolls on
the screen.
» [Synch On] (synch on) is displayed.
2
Press
/
to select [Y] or [N].
•
[Y]: the unit reads the DAB/RDS
time and sets the clock automatically.
•
[N]: the unit turns off the time
synchronization.
3
Press PROG/CLOCK SET to confirm.
4
Press
/
repeatedly to select 12 hour
or 24 hour format.
5
Press PROG/CLOCK SET to confirm.
»
The hour digits are displayed and begin
to blink.
6
Press
/
to set the hour.
12
EN
7
Press PROG/CLOCK SET to confirm.
»
The minute digits are displayed and
begin to blink.
8
Press
/
to set the minute.
9
Press PROG/CLOCK SET to confirm the
clock setting.
Turn on
1
Press .
»
The unit switches to the last selected
source.
Switch to standby
1
Press
again to switch the unit to
standby mode.
»
The clock (if set) appears on the
display panel.
To switch the unit to Eco Power Standby
mode:
1
Press and hold
seconds.
»
The backlight on the display panel
turns off.
Tip
•
The unit switches to Eco Power Standby mode
after 15 minutes in standby mode.
To switch between standby mode and Eco
Standby Mode:
1
Press and hold
seconds.
for more than 2
for more than 2
Hide quick links:
Advertisement
Table of Contents
