Chapter 2
Installing the Router
Figure 2-4
Installing the Router to the Wall
Note
For hollow-wall mounting, each bracket requires two wall anchors with washers. Wall anchors and
washers must be size number 10.
Route the cables so that they do not put a strain on the connectors or mounting hardware. To comply with
Step 4
IP 41, cables should be routed down relative to the router to prevent water from traveling on the cables.
Mounting on a Rack
The two brackets provided along with the router which can be used for wall mount or rack mount. These
brackets support mounted the router on a standard 19 inch rack. The brackets must be rotated 90 degrees
and used for mounting it on the rack.
Cisco 800M Series Integrated Services Router Hardware Installation Guide
2-6