Contents 1 Important Safety Care for your product Care of the environment Help and support 2 Your home theater Main unit Connectors Remote control 3 Connect and set up Connect speakers Connect to TV Connect audio from TV and other devices 9 Set up speakers Set up EasyLink (HDMI-CEC control) 4 Use your home theater...
If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use. • Never place the product and accessories near naked fl...
Alternatively, you can contact Philips Consumer Care in your country. Before you contact Philips, note down the model number and serial number of your product. You can fi nd this information on the back or bottom of your...
2 Your home theater Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/welcome. Main unit This section includes an overview of the main unit. ( Standby-On ) Switch the home theater on or to standby.
f ANTENNA FM 75 Signal input from an antenna, cable or satellite. g AUDIO IN - AUX 1 / AUX 2 Connect to an analog audio output on the TV or an analog device. h DIGITAL IN - OPTICAL Connect to an optical audio output on the TV or a digital device.
Page 8
( Standby-On ) • Switch the home theater on or to standby. • When EasyLink is enabled, press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby. ( Open/Close ) Open or close the disc compartment, or eject the disc.
For information about the basic connections of your home theater and accessories, see the quick start guide. For a comprehensive interactive guide, visit www.connectivityguide. philips.com. Note • For identifi cation and supply ratings, see the type plate at the back or bottom of the product.
For details, see the wireless module user manual. What you need • A Philips wireless module. (Model: Philips RWSS5512, sold separately) Connect the wireless transmitter to the Wireless Rear Audio connector on your home theater.
Connect an audio cable to hear the TV audio through your home theater (see 'Connect audio from TV and other devices' on page 9 ) . On your TV, turn on HDMI-CEC operations. For details, see the TV user manual. •...
Note • Depending on the manufacturer, HDMI-CEC is known by many names. For information on your device, see the user manual of the device. • Philips does not guarantee 100% interoperability with all HDMI-CEC devices. SETUP on your home theater...
Before you start • Connect your home theater to the HDMI- CEC compliant device through HDMI connection. • Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater. Enable EasyLink Press SETUP .
4 Use your home theater This section helps you use the home theater to play media from a wide range of sources. Before you start • Make the necessary connections described in the quick start guide and the user manual. •...
Data fi les Your home theater can play pictures, audio and video fi les contained in a disc or a USB storage device. Before you play a fi le, check that the fi le format is supported by your home theater (see 'File formats' on page 21 ) .
USB storage devices Enjoy pictures, audio, and video stored on a USB storage device such as an MP4 player or digital camera. What you need • A USB storage device that is formatted for FAT fi le system, and complies with the Mass Storage Class.
Picture options INFO to access picture preview Press mode. » 12 thumbnail pictures are displayed. Press to go to previous or next preview page. Press the Navigation buttons and OK to select a picture. Musical slideshow If the picture and audio fi les are from the same disc or USB storage device, you can create a musical slideshow.
Create MP3 fi les Use your home theater to convert audio CDs into MP3 fi les. What you need • An audio disc. • A USB storage device. Connect a USB storage device to your home theater. Play your audio CD (CDDA). Press CREATE MP3 .
Page 19
Surround sound mode Experience an immersive audio experience with surround sound modes. Press SURR repeatedly to select a surround mode. • 5CH STEREO : Enhanced stereo sound. Ideal for party music. MULTI-CH / DOLBY PLII : Traditional • 5.1 channel for a more relaxing cinematic experience.
5 Change settings The home theater settings are already confi gured for optimal performance. Unless you have a reason to change a setting, we recommend that you keep the default setting. Note • You cannot change a setting that is grayed out. •...
Parental control settings Password and Ratings SETUP . Press Select [Preference Setup] and then press OK . [Password] : Set or change your • password for parental control access. If you do not have a password or have forgotten your password, enter 0000 . [Parental] : Enable maturity-based •...
Caution • Do not install a lower version of software than the current version installed on your product. Philips is not liable for problems caused due to software downgrade. Check software version Check the version of the current software installed on your home theater.
7 Product specifications Note • Specifi cations and design are subject to change without notice. Region codes The type plate on the back or bottom of the home theater shows which regions it supports. Country Europe, United Kingdom Asia Pacific, Taiwan, Korea Latin America Australia, New Zealand Russia, India...
Page 24
• Compatibility: Hi-Speed USB (2.0) • Class support: USB Mass Storage Class (MSC) • File system: FAT16, FAT32 Main unit • Power supply: • Europe/China/Russia/India: 220-240V~, 50 Hz • Latin America/Asia Pacifi c: 110-127V/220-240V~, 50-60 Hz • Power consumption: 105 W •...
If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Main unit The buttons on the home theater do not work.
Page 26
The operation is not possible. EasyLink does not work. • Make sure that the home theater is connected to a Philips brand EasyLink TV, and the EasyLink option is turned on (see 'Set up EasyLink (HDMI-CEC control)' on page 10 ) .
9 Notice This section contains the legal and trademark notices. Copyright This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Copyright in the UK Recording and playback of material may require consent.
Page 28
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed device must be registered in order to play purchased DivX Video-on- Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
10 Index audio from TV and other devices audio input mapping audio language for discs audio options auto standby batteries change password character set check current version connect analog audio cable connect coaxial audio cable connect coaxial audio cable connect composite video cable connect FM antenna connect HDMI cable connect home theater...
Page 30
radio recycling remote control overview repeat mode restore default settings rotate pictures screen saver setup menu sleep timer slideshow sound mode speakers placement speakers setup specifi cations subtitle language for discs supported fi le format supported media formats surround sound synchronize picture and sound system audio control time search...