Sony IPELA PCS-G70 Manual page 2
Video communication system
Hide thumbs
Also See for IPELA PCS-G70:
- Operating instructions manual (323 pages) ,
- Operation manual (174 pages) ,
- Integration manual (86 pages)
Advertisement
Connection Sheet (ISDN Connection)
System Setup
1
TV monitor**
3
Camera Unit
2
Microphone
PCS-A1**
PCSA-CG70/
CG70P**
5
6
AC adaptor
* supplied
VGP-AC19V45 or
** not supplied
VGP-AC19V15*
2
3
Connect the
Connect the camera.
microphone.
Connect the Camera Unit and
Communication Terminal using the
Connect the microphone cable
supplied camera cable.
to Communication Terminal.
Microphone
Communication
Terminal
When using one camera, connect it to the MAIN
CAMERA connector. A second camera can be
connected to the SUB CAMERA connector.
4
Data Solution Box
PCSA-DSB1S**
Communication Terminal
PCS-PG70/PG70P
Remote Control
Plug adaptor*
Receiver*
ISDN
line
ISDN Unit**
• For connection examples using the Remote Control
Receiver and Plug adaptor, refer to the Operating
Instructions on the supplied CD-ROM.
• Both the Remote Control Receiver and the Camera Unit
can receive signals from the Remote Controller. When
Power cord*
both are connected at the same time, the Remote Control
Receiver receives the Remote Controller signals.
4
Connect the Data Solution Box.
Connect the Data Solution Box and Communication
Terminal using the cable supplied with the Data Solution
Box.
Camera Unit
Camera cable
(supplied with the
Camera Unit)
Used with the Data Solution Box for the first time, the
Communication
Communication Terminal may automatically upgrade the software
Terminal
of the Data Solution Box. While the upgrading message is
displayed on the monitor screen, be sure not to turn off the
Communication Terminal. Doing so may cause malfunction of the
system.
Let's connect
Notes
• Be sure to turn off all the
equipment before making
any connections.
• Do not connect/disconnect
the camera cable or the
interface cable with the
power on. Doing so may
damage the Camera Unit,
Communication Terminal or
ISDN Unit.
5
Connect the ISDN Unit.
1
2
Data Solution Box
Communication
Terminal
Interface cable (supplied with
the PCSA-DSB1S)
Interface cable
(supplied with
the ISDN Unit)
Communication
Terminal
ISDN Unit
Used with an ISDN Unit for the first time, the Communication Terminal may
automatically upgrade the software of the ISDN Unit. While the upgrading
message is displayed on the monitor screen, be sure not to turn off the
Communication Terminal. Doing so may cause malfunction of the system.
** not supplied
1
Connect the TV monitor.
Connect the TV monitor and Communication Terminal using the
supplied audio cable and S-video cable.
AUDIO IN
S-VIDEO IN
L
R
TV monitor
S-video cable*
Audio cable*
Communication
Terminal
* supplied
Connect the ISDN Unit and Communication Terminal
using the interface cable supplied with the ISDN Unit.
Connect the ISDN Unit to an ISDN line using an ISDN
modular cable (not supplied).
ISDN Unit
(front)
PCSA-B384S**
to ISDN 1-3
PCSA-B768S**
to ISDN 1-6
PCSA-PRI**
1
to ISDN PRI
2
To ISDN
line
(rear)
ISDN modular cable**
• When connecting a second or third
monitor, use the VIDEO OUT
MONITOR 2 or the RGB OUT
connector on the Communication
Terminal, or the RGB OUT connector
on the Data Solution Box. For details,
refer to the Operating Instructions.
• The AUDIO OUT (MIXED) jack is used
to make an audio recording of a
conference. This is not used during
regular conferences.
6
Connect the AC adaptor.
Connect the supplied AC adaptor to the
Communication Terminal, and then plug the
power cord into a wall outlet.
Communication
Terminal
AC adaptor*
Power cord*
to a wall outlet
(120V AC)
* supplied
Advertisement
